サマリー

The global piling machine market grew at a CAGR of around 5% during 2015-2020. A piling machine is a piece of mechanical equipment used to place piles and poles in the ground for supporting constructions. It is commonly used for drilling in grounds with silty clay and sandy soil and includes an impact hammer and a long, columnar and extendable component, or pile, manufactured with steel, timber or reinforced concrete. It can perform auger boring, drilled percussion, impact-driven and rotary boring piling. The machine is widely used for the construction of bridges, water tanks, foundation reinforcement and diaphragm walls in residential and commercial complexes. Apart from this, it is also used in densely populated areas to excavate or drill the soil with minimal vibrations and dispersion of dust.

Significant growth in the construction industry across the globe is one of the key factors creating a positive outlook for the market. Moreover, the widespread adoption of piling machines for the installation of wind turbines in loose soil is also driving the market growth. Governments of both developed and emerging economies are promoting the installation of offshore wind turbines for improved electricity generation, which is leading to the increasing utilization of these machines for underwater piling operations. Additionally, various technological advancements, such as the development of machine variants with low-noise and low-emission features, are acting as other major growth-inducing factors. Equipment manufacturers are also replacing diesel hammers with hydraulic variants to mitigate adverse environmental impacts. Other factors, including extensive infrastructural developments, along with significant growth in the metal mining industries, are anticipated to drive the market further. Looking forward, IMARC Group expects the global piling machine market to exhibit moderate growth during the next five years.

Key Market Segmentation:
IMARC Group provides an analysis of the key trends in each sub-segment of the global piling machine market, along with forecasts at the global, regional and country level from 2021-2026. Our report has categorized the market based on region, product, piling method and application.

Breakup by Product:

Impact Hammer
Vibratory Drivers
Piling Rigs
Others

Breakup by Piling Method:

Impact Driven
Drilled Percussive
Rotary Bored
Auger Boring
Others

Breakup by Application:

Civil Engineering
Oil and Gas
Industrial Construction
Others

Breakup by Region:

North America
United States
Canada
Asia-Pacific
China
Japan
India
South Korea
Australia
Indonesia
Others
Europe
Germany
France
United Kingdom
Italy
Spain
Russia
Others
Latin America
Brazil
Mexico
Others
Middle East and Africa

Competitive Landscape:
The competitive landscape of the industry has also been examined along with the profiles of the key players being ABI GmbH, BAUER AG, BSP International Foundations Ltd., Casagrande S.p.a, Dawson Construction Plant Ltd., Epiroc AB, IHC IQIP B.V., International Construction Equipment, Junttan Oy (Sinituote Oy), MKT Manufacturing Inc., Sany Group, TONTI TRADING S.R.L., WATSON DRILL RIG and XCMG Group.

Key Questions Answered in This Report:
How has the global piling machine market performed so far and how will it perform in the coming years?
What has been the impact of COVID-19 on the global piling machine market?
What are the key regional markets?
What is the breakup of the market based on the product?
What is the breakup of the market based on the piling method?
What is the breakup of the market based on the application?
What are the various stages in the value chain of the industry?
What are the key driving factors and challenges in the industry?
What is the structure of the global piling machine market and who are the key players?
What is the degree of competition in the industry?

ページTOPに戻る

目次

1 Preface
2 Scope and Methodology
2.1 Objectives of the Study
2.2 Stakeholders
2.3 Data Sources
2.3.1 Primary Sources
2.3.2 Secondary Sources
2.4 Market Estimation
2.4.1 Bottom-Up Approach
2.4.2 Top-Down Approach
2.5 Forecasting Methodology
3 Executive Summary
4 Introduction
4.1 Overview
4.2 Key Industry Trends
5 Global Piling Machine Market
5.1 Market Overview
5.2 Market Performance
5.3 Impact of COVID-19
5.4 Market Forecast
6 Market Breakup by Product
6.1 Impact Hammer
6.1.1 Market Trends
6.1.2 Market Forecast
6.2 Vibratory Drivers
6.2.1 Market Trends
6.2.2 Market Forecast
6.3 Piling Rigs
6.3.1 Market Trends
6.3.2 Market Forecast
6.4 Others
6.4.1 Market Trends
6.4.2 Market Forecast
7 Market Breakup by Piling Method
7.1 Impact Driven
7.1.1 Market Trends
7.1.2 Market Forecast
7.2 Drilled Percussive
7.2.1 Market Trends
7.2.2 Market Forecast
7.3 Rotary Bored
7.3.1 Market Trends
7.3.2 Market Forecast
7.4 Auger Boring
7.4.1 Market Trends
7.4.2 Market Forecast
7.5 Others
7.5.1 Market Trends
7.5.2 Market Forecast
8 Market Breakup by Application
8.1 Civil Engineering
8.1.1 Market Trends
8.1.2 Market Forecast
8.2 Oil and Gas
8.2.1 Market Trends
8.2.2 Market Forecast
8.3 Industrial Construction
8.3.1 Market Trends
8.3.2 Market Forecast
8.4 Others
8.4.1 Market Trends
8.4.2 Market Forecast
9 Market Breakup by Region
9.1 North America
9.1.1 United States
9.1.1.1 Market Trends
9.1.1.2 Market Forecast
9.1.2 Canada
9.1.2.1 Market Trends
9.1.2.2 Market Forecast
9.2 Asia-Pacific
9.2.1 China
9.2.1.1 Market Trends
9.2.1.2 Market Forecast
9.2.2 Japan
9.2.2.1 Market Trends
9.2.2.2 Market Forecast
9.2.3 India
9.2.3.1 Market Trends
9.2.3.2 Market Forecast
9.2.4 South Korea
9.2.4.1 Market Trends
9.2.4.2 Market Forecast
9.2.5 Australia
9.2.5.1 Market Trends
9.2.5.2 Market Forecast
9.2.6 Indonesia
9.2.6.1 Market Trends
9.2.6.2 Market Forecast
9.2.7 Others
9.2.7.1 Market Trends
9.2.7.2 Market Forecast
9.3 Europe
9.3.1 Germany
9.3.1.1 Market Trends
9.3.1.2 Market Forecast
9.3.2 France
9.3.2.1 Market Trends
9.3.2.2 Market Forecast
9.3.3 United Kingdom
9.3.3.1 Market Trends
9.3.3.2 Market Forecast
9.3.4 Italy
9.3.4.1 Market Trends
9.3.4.2 Market Forecast
9.3.5 Spain
9.3.5.1 Market Trends
9.3.5.2 Market Forecast
9.3.6 Russia
9.3.6.1 Market Trends
9.3.6.2 Market Forecast
9.3.7 Others
9.3.7.1 Market Trends
9.3.7.2 Market Forecast
9.4 Latin America
9.4.1 Brazil
9.4.1.1 Market Trends
9.4.1.2 Market Forecast
9.4.2 Mexico
9.4.2.1 Market Trends
9.4.2.2 Market Forecast
9.4.3 Others
9.4.3.1 Market Trends
9.4.3.2 Market Forecast
9.5 Middle East and Africa
9.5.1 Market Trends
9.5.2 Market Breakup by Country
9.5.3 Market Forecast
10 SWOT Analysis
10.1 Overview
10.2 Strengths
10.3 Weaknesses
10.4 Opportunities
10.5 Threats
11 Value Chain Analysis
12 Porters Five Forces Analysis
12.1 Overview
12.2 Bargaining Power of Buyers
12.3 Bargaining Power of Suppliers
12.4 Degree of Competition
12.5 Threat of New Entrants
12.6 Threat of Substitutes
13 Price Analysis
14 Competitive Landscape
14.1 Market Structure
14.2 Key Players
14.3 Profiles of Key Players
14.3.1 ABI GmbH
14.3.1.1 Company Overview
14.3.1.2 Product Portfolio
14.3.2 BAUER AG
14.3.2.1 Company Overview
14.3.2.2 Product Portfolio
14.3.2.3 Financials
14.3.2.4 SWOT Analysis
14.3.3 BSP International Foundations Ltd
14.3.3.1 Company Overview
14.3.3.2 Product Portfolio
14.3.4 Casagrande S.p.a
14.3.4.1 Company Overview
14.3.4.2 Product Portfolio
14.3.5 Dawson Construction Plant Ltd.
14.3.5.1 Company Overview
14.3.5.2 Product Portfolio
14.3.6 Epiroc AB
14.3.6.1 Company Overview
14.3.6.2 Product Portfolio
14.3.6.3 SWOT Analysis
14.3.7 IHC IQIP B.V.
14.3.7.1 Company Overview
14.3.7.2 Product Portfolio
14.3.8 International Construction Equipment
14.3.8.1 Company Overview
14.3.8.2 Product Portfolio
14.3.9 Junttan Oy (Sinituote Oy)
14.3.9.1 Company Overview
14.3.9.2 Product Portfolio
14.3.10 MKT Manufacturing Inc.
14.3.10.1 Company Overview
14.3.10.2 Product Portfolio
14.3.11 Sany Group
14.3.11.1 Company Overview
14.3.11.2 Product Portfolio
14.3.12 TONTI TRADING S.R.L.
14.3.12.1 Company Overview
14.3.12.2 Product Portfolio
14.3.13 WATSON DRILL RIG
14.3.13.1 Company Overview
14.3.13.2 Product Portfolio
14.3.14 XCMG Group
14.3.14.1 Company Overview
14.3.14.2 Product Portfolio