Summary

The Saudi Arabia PE Pipes market reached a volume of 183,033 Tons in 2020. Looking forward, IMARC Group expects the market to exhibit moderate growth during 2021-2026. Keeping in mind the uncertainties of COVID-19, we are continuously tracking and evaluating the direct as well as the indirect influence of the pandemic on different end use industries. These insights are included in the report as a major market contributor.

Polyethylene (PE) is a highly crystalline non-polar thermoplastic generated through the polymerization of ethylene. It can be easily melted and reshaped in different product ranging from bags, bottles, and pipes to medical devices and bulletproof vests. PE pipes are durable, flexible, resistant to biological growth and do not rust or corrode. Additionally, a wide range of piping applications in Saudi Arabia, such as supplying water for drinking and irrigation, serving as telecom ducts, and sewerage and sewage disposal, have resulted in a high demand for PE pipes in the country.

PE pipes are extensively used in the distribution of oil and natural gas as these pipes are inherently tough, resilient and resistant to damage caused by external loads and vibrations. This is expected to spur the growth of the market as Saudi Arabia has an abundance of oil, natural gas and minerals. Additionally, these pipes are used in desalinating sea-water, treating wastewater and supplying water for irrigation. This is further projected to influence the growth of the market. Some of the other factors that are propelling the demand for polyethylene as a piping material are its eco-friendly nature, easy installation process, lower maintenance cost and longer service life.

The report has segmented the market on the basis of type into HDPE, MDPE, LDPE and LLDPE pipes. Currently, HDPE pipes are the most popular product type, holding the largest share. The market is also segregated on the basis of application as water supply, gas supply, sewerage and drainage, mining and slurry lines, and irrigation. Amongst these, the water supply sector is the leading application area, accounting for the majority of the market share. An analysis of the competitive landscape provides the details of the key players operative in the market. Some of these include Saudi Plastic Products Company Ltd., Alwasail Industrial Company, Arabian Gulf Manufacturers Ltd., Saudi Arabian Amiantit Company, Al Jubail Sanitary Pipe Factory and IKK Group.

This report provides a deep insight into the Saudi Arabia PE pipes industry covering all its essential aspects. This ranges from macro overview of the market to micro details of the industry performance, recent trends, key market drivers and challenges, SWOT analysis, Porter’s five forces analysis, value chain analysis, etc. The report also provides a comprehensive analysis for setting up a PE pipes market manufacturing plant. The study analyses the processing and manufacturing requirements, project cost, project funding, project economics, expected returns on investment, profit margins, etc. This report is a must-read for entrepreneurs, investors, researchers, consultants, business strategists, and all those who have any kind of stake or are planning to foray into the Saudi Arabia PE pipes industry in any manner.

ページTOPに戻る

Table of Contents

1 Preface
2 Scope and Methodology
2.1 Objectives of the Study
2.2 Stakeholders
2.3 Data Sources
2.3.1 Primary Sources
2.3.2 Secondary Sources
2.4 Market Estimation
2.4.1 Bottom-Up Approach
2.4.2 Top-Down Approach
2.5 Forecasting Methodology
3 Executive Summary
4 Introduction
4.1 Overview
4.2 Key Industry Trends
5 Saudi Arabia Polyethylene Market
5.1 Market Overview
5.2 Market Performance
5.3 Price Trends
5.4 Market Breakup by Type
5.4.1 HDPE
5.4.1.1 Market Trends
5.4.1.2 Market Forecast
5.4.2 LDPE
5.4.2.1 Market Trends
5.4.2.2 Market Forecast
5.4.3 LLDPE
5.4.3.1 Market Trends
5.4.3.2 Market Forecast
5.5 Market Breakup by Application
5.5.1 Packaging
5.5.1.1 Market Trends
5.5.1.2 Market Forecast
5.5.2 Construction
5.5.2.1 Market Trends
5.5.2.2 Market Forecast
5.5.3 Electronics and Electrical
5.5.3.1 Market Trends
5.5.3.2 Market Forecast
5.5.4 Household Applications
5.5.4.1 Market Trends
5.5.4.2 Market Forecast
5.5.5 Automotive
5.5.5.1 Market Trends
5.5.5.2 Market Forecast
5.5.6 Others
5.5.6.1 Market Trends
5.5.6.2 Market Forecast
5.6 Market Forecast
6 Saudi Arabia PE Pipes Market
6.1 Market Overview
6.2 Market Performance
6.3 Impact of COVID-19
6.4 Market Breakup by Type
6.4.1 HDPE
6.4.1.1 Market Trends
6.4.1.2 Market Forecast
6.4.2 MDPE
6.4.2.1 Market Trends
6.4.2.2 Market Forecast
6.4.3 LDPE
6.4.3.1 Market Trends
6.4.3.2 Market Forecast
6.4.4 LLDPE
6.4.4.1 Market Trends
6.4.4.2 Market Forecast
6.5 Market Breakup by Applications
6.5.1 Water Supply
6.5.1.1 Market Trends
6.5.1.2 Market Forecast
6.5.2 Irrigation
6.5.2.1 Market Trends
6.5.2.2 Market Forecast
6.5.3 Sewerage and Drainage
6.5.3.1 Market Trends
6.5.3.2 Market Forecast
6.5.4 Gas Supply
6.5.4.1 Market Trends
6.5.4.2 Market Forecast
6.5.5 Mining and Slurry Lines
6.5.5.1 Market Trends
6.5.5.2 Market Forecast
6.5.6 Others
6.5.6.1 Market Trends
6.5.6.2 Market Forecast
6.6 Price Analysis
6.6.1 Price Trends
6.6.2 Key Price Indicators
6.6.3 Price Forecast
6.6.4 Industry Best Practices
6.7 Market Forecast
6.8 SWOT Analysis
6.9 Value Chain Analysis
6.10 Porters Five Forces Analysis
6.10.1 Overview
6.10.2 Bargaining Power of Buyers
6.10.3 Bargaining Power of Suppliers
6.10.4 Degree of Rivalry
6.10.5 Threat of New Entrants
6.10.6 Threat of Substitutes
6.11 Key Market Drivers and Success Factors
7 Competitive Landscape
7.1 Market Structure
7.2 Key Players
8 PE Pipes Manufacturing Process
8.1 Product Overview
8.2 Detailed Process Flow
8.3 Various Types of Unit Operations Involved
8.4 Mass Balance and Raw Material Requirements
9 Project Details, Requirements and Costs Involved
9.1 Land, Location and Site Development
9.2 Construction Requirements and Expenditures
9.3 Plant Machinery
9.4 Machinery Pictures
9.5 Raw Materials Requirements and Expenditures
9.6 Raw Material and Final Product Pictures
9.7 Packaging Requirements and Expenditures
9.8 Transportation Requirements and Expenditures
9.9 Utilities Requirements and Expenditures
9.10 Manpower Requirements and Expenditures
9.11 Other Capital Investments
10 Loans and Financial Assistance
11 Project Economics
11.1 Capital Cost of the Project
11.2 Techno-Economic Parameters
11.3 Product Pricing and Margins Across Various Levels of the Supply Chain
11.4 Income Projections
11.5 Expenditure Projections
11.6 Taxation and Depreciation
11.7 Financial Analysis
11.8 Profit Analysis
12 Key Players Profiles
12.1 Saudi Plastic Products Company Ltd. (SAPPCO)
12.1.1 Company Overview
12.1.2 Company Description
12.2 Alwasail Industrial Company
12.2.1 Company Overview
12.2.2 Company Description
12.3 Arabian Gulf Manufacturers Ltd.
12.3.1 Company Overview
12.3.2 Company Description
12.4 Saudi Arabian Amiantit Company
12.4.1 Company Overview
12.4.2 Company Description
12.5 Al Jubail Sanitary Pipe Factory
12.5.1 Company Overview
12.5.2 Company Description
12.6 IKK Group
12.6.1 Company Overview
12.6.2 Company Description

List of Figures

Figure 1: Saudi Arabia: PE Pipes Market: Major Drivers and Challenges
Figure 2: Saudi Arabia: PE Production Capacity: Volume Trends (in Million Tons), 2015-2020
Figure 3: Saudi Arabia: PE Market: Consumption Volume (in Million Tons), 2015-2020
Figure 4: Saudi Arabia: PE Market: Consumption Value (in Million US$), 2015-2020
Figure 5: Saudi Arabia: PE Market: Average Prices (in US$/Ton), 2015-2020
Figure 6: Saudi Arabia: PE Market Forecast: Average Prices (in US$/Ton), 2021-2026
Figure 7: Saudi Arabia: PE Market: Production Capacity Breakup by Type (in %), 2020
Figure 8: Saudi Arabia: HDPE Production Capacity: Volume Trends (in Million Tons), 2015 & 2020
Figure 9: Saudi Arabia: HDPE Production Capacity Forecast: Volume Trends (in Million Tons), 2021-2026
Figure 10: Saudi Arabia: LDPE Production Capacity: Volume Trends (in Million Tons), 2015 & 2020
Figure 11: Saudi Arabia: LDPE Production Capacity Forecast: Volume Trends (in Million Tons), 2021-2026
Figure 12: Saudi Arabia: LLDPE Production Capacity: Volume Trends (in Million Tons), 2015 & 2020
Figure 13: Saudi Arabia: LLDPE Production Capacity Forecast: Volume Trends (in Million Tons), 2021-2026
Figure 14: Saudi Arabia: PE Market: Consumption Volume Breakup by Application (in %), 2020
Figure 15: Saudi Arabia: PE Market (Applications in Packaging): Consumption Volume (in ‘000 Tons), 2015 & 2020
Figure 16: Saudi Arabia: PE Market Forecast (Applications in Packaging): Consumption Volume (in ‘000 Tons), 2021-2026
Figure 17: Saudi Arabia: PE Market (Applications in Construction): Consumption Volume (in ‘000 Tons), 2015 & 2020
Figure 18: Saudi Arabia: PE Market Forecast (Applications in Construction): Consumption Volume (in ‘000 Tons), 2021-2026
Figure 19: Saudi Arabia: PE Market (Applications in Electronics and Electrical Industry): Consumption Volume (in ‘000 Tons), 2015 & 2020
Figure 20: Saudi Arabia: PE Market Forecast (Applications in Electronics and Electrical Industry): Consumption Volume (in ‘000 Tons), 2021-2026
Figure 21: Saudi Arabia: PE Market (Household Applications): Consumption Volume (in ‘000 Tons), 2015 & 2020
Figure 22: Saudi Arabia: PE Market Forecast (Household Applications): Consumption Volume (in ‘000 Tons), 2021-2026
Figure 23: Saudi Arabia: PE Market (Automotive Applications): Consumption Volume (in ‘000 Tons), 2015 & 2020
Figure 24: Saudi Arabia: PE Market Forecast (Automotive Applications): Consumption Volume (in ‘000 Tons), 2021-2026
Figure 25: Saudi Arabia: PE Market (Other Applications): Consumption Volume (in ‘000 Tons), 2015 & 2020
Figure 26: Saudi Arabia: PE Market Forecast (Other Applications): Consumption Volume (in ‘000 Tons), 2021-2026
Figure 27: Saudi Arabia: PE Market Forecast: Production Capacity (in Million Tons), 2021-2026
Figure 28: Saudi Arabia: PE Market Forecast: Consumption Volume (in Million Tons), 2021-2026
Figure 29: Saudi Arabia: PE Market Forecast: Consumption Value (in Million US$), 2021-2026
Figure 30: Saudi Arabia: PE Pipes Market: Consumption Volume (in Tons), 2015-2020
Figure 31: Saudi Arabia: PE Pipes Market: Consumption Value (in Million US$), 2015-2020
Figure 32: Saudi Arabia: PE Pipes Market: Consumption Volume Breakup by Type (in %), 2020
Figure 33: Saudi Arabia: HDPE Pipes Market: Consumption Volume (in Tons), 2015 & 2020
Figure 34: Saudi Arabia: HDPE Pipes Market Forecast: Consumption Volume (in Tons), 2021-2026
Figure 35: Saudi Arabia: MDPE Pipes Market: Consumption Volume (in Tons), 2015 & 2020
Figure 36: Saudi Arabia: MDPE Pipes Market Forecast: Consumption Volume (in Tons), 2021-2026
Figure 37: Saudi Arabia: LDPE Pipes Market: Consumption Volume (in Tons), 2015 & 2020
Figure 38: Saudi Arabia: LDPE Pipes Market Forecast: Consumption Volume (in Tons), 2021-2026
Figure 39: Saudi Arabia: LLDPE Pipes Market: Consumption Volume (in Tons), 2015 & 2020
Figure 40: Saudi Arabia: LLDPE Pipes Market Forecast: Consumption Volume (in Tons), 2021-2026
Figure 41: Saudi Arabia: PE Pipes Market: Consumption Volume Breakup by Application (in %), 2020
Figure 42: Saudi Arabia: PE Pipes Market (Applications in Water Supply): Consumption Volume (in Tons), 2015 & 2020
Figure 43: Saudi Arabia: PE Pipes Market Forecast (Applications in Water Supply): Consumption Volume (in Tons), 2021-2026
Figure 44: Saudi Arabia: PE Pipes Market (Applications in Irrigation): Consumption Volume (in Tons), 2015 & 2020
Figure 45: Saudi Arabia: PE Pipes Market Forecast (Applications in Irrigation): Consumption Volume (in Tons), 2021-2026
Figure 46: Saudi Arabia: PE Pipes Market (Applications in Sewerage and Drainage): Consumption Volume (in Tons), 2015 & 2020
Figure 47: Saudi Arabia: PE Pipes Market Forecast (Applications in Sewerage and Drainage): Consumption Volume (in Tons), 2021-2026
Figure 48: Saudi Arabia: PE Pipes Market (Applications in Gas Supply): Consumption Volume (in Tons), 2015 & 2020
Figure 49: Saudi Arabia: PE Pipes Market Forecast (Applications in Gas Supply): Consumption Volume (in Tons), 2021-2026
Figure 50: Saudi Arabia: PE Pipes Market (Applications in Mining and Slurry Lines): Consumption Volume (in Tons), 2015 & 2020
Figure 51: Saudi Arabia: PE Pipes Market Forecast (Applications in Mining and Slurry Lines): Consumption Volume (in Tons), 2021-2026
Figure 52: Saudi Arabia: PE Pipes Market (Other Applications): Consumption Volume (in Tons), 2015 & 2020
Figure 53: Saudi Arabia: PE Pipes Market Forecast (Other Applications): Consumption Volume (in Tons), 2021-2026
Figure 54: Saudi Arabia: PE Pipes Market: Average Prices (in US$/Ton), 2015-2020
Figure 55: HDPE Pipes Manufacturing: Price Structure (in US$/Ton)
Figure 56: Saudi Arabia: PE Pipes Market Forecast: Average Prices (in US$/Ton), 2021-2026
Figure 57: Saudi Arabia: PE Pipes Market Forecast: Consumption Volume (in Tons), 2021-2026
Figure 58: Saudi Arabia: PE Pipes Market Forecast: Consumption Value (in Million US$), 2021-2026
Figure 59: Saudi Arabia: PE Pipes Industry: SWOT Analysis
Figure 60: Saudi Arabia: PE Pipes Industry: Value Chain Analysis
Figure 61: Saudi Arabia: PE Pipes Industry: Porter’s Five Forces Analysis
Figure 62: HDPE Pipes Manufacturing Plant: Detailed Process Flow
Figure 63: HDPE Pipes Manufacturing Process: Conversion Rate of Feedstocks
Figure 64: PE (HDPE) Pipes Manufacturing Plant: Breakup of Capital Costs (in %)
Figure 65: PE (HDPE) Pipes Industry: Profit Margins at Various Stages of Supply Chain
Figure 66: PE (HDPE) Pipes Manufacturing Plant: Breakup of Operational Costs

List of Tables

Table 1: Saudi Arabia: PE Market: Key Industry Highlights, 2020 and 2026
Table 2: Saudi Arabia: PE Pipes Market: Key Industry Highlights, 2020 and 2026
Table 3: Saudi Arabia: PE Pipes Market Forecast: Consumption Volume Breakup by Type (in Tons), 2021-2026
Table 4: Saudi Arabia: PE Pipes Market Forecast: Consumption Volume Breakup by Applications (in Tons), 2021-2026
Table 5: Saudi Arabia: PE Pipes Market: Competitive Structure
Table 6: Saudi Arabia: PE Pipes Market: Key Players
Table 7: HDPE Pipes: General Properties
Table 8: HDPE Pipes Manufacturing Plant: Raw Material Requirements (in Tons/Day)
Table 9: PE (HDPE) Pipes Manufacturing Plant: Costs Related to Land and Site Development (in US$)
Table 10: PE (HDPE) Pipes Manufacturing Plant: Costs Related to Civil Works (in US$)
Table 11: PE (HDPE) Pipes Manufacturing Plant: Costs Related to Plant and Machinery (in US$)
Table 12: PE (HDPE) Pipes Manufacturing Plant: Raw Material Requirements (in Tons/Day) and Expenditures (US$/Ton)
Table 13: PE (HDPE) Pipes Manufacturing Plant: Utility Requirements and Expenditures
Table 14: PE (HDPE) Pipes Manufacturing Plant: Costs Related to Salaries and Wages (in US$)
Table 15: PE (HDPE) Pipes Manufacturing Plant: Costs Related to Other Capital Investments (in US$)
Table 16: Details of Financial Assistance Offered by Financial Institutions
Table 17: PE (HDPE) Pipe Manufacturing Plant: Capital Costs (in US$)
Table 18: PE (HDPE) Pipes Manufacturing Plant: Techno-Economic Parameters
Table 19: PE (HDPE) Pipes Manufacturing Plant: Income Projections (in US$)
Table 20: PE (HDPE) Pipes Manufacturing Plant: Expenditure Projections (in US$)
Table 21: PE (HDPE) Pipes Manufacturing Plant: Taxation (in US$/Year)
Table 22: PE (HDPE) Pipes Manufacturing Plant: Depreciation (in US$/Year)
Table 23: PE (HDPE) Pipes Manufacturing Plant: Cash Flow Analysis Without Considering the Income Tax Liability
Table 24: PE (HDPE) Pipes Manufacturing Plant: Profit and Loss Account (in US$)