Summary

Air combat maneuvering instrumentation (ACMI) is a specialized training system used to improve pilot skills in aerial combat. ACMI systems are typically attached to military aircraft, such as fighter jets, to record, monitor, and analyze flight data during combat training exercises. This system allows pilots to engage in realistic combat scenarios without using live weapons, creating a safe and cost-effective training environment. ACMI systems are composed of ACMI pods mounted on aircraft and ground stations that collect and analyze flight data.
The ACMI pods use GPS and other sensors to track essential flight parameters such as position, speed, altitude, heading, and maneuvers in real-time. This data is transmitted back to ground stations, where it can be monitored live or recorded for later analysis. The data is used to give pilots a full picture of their flight path and maneuvers, helping them and their instructors review performance.

As the defense landscape continues to evolve with technological advancements and geopolitical complexities, the air combat maneuvering instrumentation market plays a pivotal role in ensuring military readiness and operational effectiveness. One of the key priorities for defense organizations today is enhancing pilot training to meet the demands of modern warfare. With the introduction of 5th generation aircraft like the F-35 and F-22, traditional training methods are no longer sufficient. ACMI systems are essential for capturing real-time data, tracking performance, and providing detailed debriefing capabilities, allowing pilots to refine their tactics in realistic combat scenarios.

Military training has evolved beyond traditional methods, with greater emphasis on data-driven and immersive environments that mimic actual combat conditions. For instance, ACMI systems track aircraft in real-time, record maneuvers, and provide feedback on tactics, making them a valuable tool for air forces seeking to enhance pilot performance. In parallel, cybersecurity has become a critical consideration within these systems, as ACMI technology captures and transmits sensitive, real-time data that must be protected from potential cyber threats. Nations such as the U.S. are prioritizing training and cybersecurity investments.
For instance, in May 2022, Cubic was awarded a contract by the U.S. Air Force to enhance the P5 Air Combat Training System with a cybersecurity update, valued at up to $90.6 million over 6 years. The work, based in San Diego, will focus on integrating a Type 1 encryptor that provides a National Security Agency-certified control interface. This interface will secure the P5 system by managing and restricting data access and transfer across different security domains, bolstering the system's cybersecurity capabilities in training environments. This emphasis on cybersecurity within ACMI systems highlights the importance of secure, advanced combat training solutions to enhance both readiness and data protection in modern military operations.

Factors such as rise in geopolitical tensions and defense spending, increased focus on cybersecurity in ACMI for secure combat training, and technological advancements in ACMI systems drive the growth of the air combat maneuvering instrumentation market. However, high initial and maintenance costs and complex system integration are expected to hamper market growth. In addition, the increase in focus on live, virtual, and constructive (LVC) training and the expansion of ACMI capabilities to support 5th generation aircraft present significant opportunities for market development.
The air combat maneuvering instrumentation market is segmented by mode of operation, component, system type, application, and region. By mode of operation, the market is divided into non-autonomous and autonomous systems. In terms of component, the market is categorized into hardware, software, and services. By system type, the market is segmented into real-time and non-real-time systems. By application, the market is divided into military training, weapons development, ground training, LVC training (live, virtual, constructive), and others. By region, it is analyzed across North America, Europe, Asia-Pacific, and LAMEA.

The air combat maneuvering instrumentation market analysis includes top companies operating in the market such as Prescient Systems & Technologies Pte Ltd., RTX, Leonardo S.p.A., L3Harris Technologies, Inc., Arotech Corporation, Elbit Systems Ltd., Cubic Corporation, IAI (Israel Aerospace Industries), AEROTREE Group, SDT Space & Defence Technologies Inc., Saab AB, ADCOR MAGnet Systems, and Diehl Stiftung & Co. KG. These players have adopted various strategies to increase their market penetration and strengthen their position in the air combat maneuvering instrumentation industry.

Key Benefits For Stakeholders
●This report provides a quantitative analysis of the market segments, current trends, estimations, and dynamics of the air combat maneuvering instrumentation market analysis from 2023 to 2033 to identify the prevailing air combat maneuvering instrumentation market opportunities.
●The market research is offered along with information related to key drivers, restraints, and opportunities.
●Porter's five forces analysis highlights the potency of buyers and suppliers to enable stakeholders make profit-oriented business decisions and strengthen their supplier-buyer network.
●In-depth analysis of the air combat maneuvering instrumentation market segmentation assists to determine the prevailing market opportunities.
●Major countries in each region are mapped according to their revenue contribution to the global market.
●Market player positioning facilitates benchmarking and provides a clear understanding of the present position of the market players.
●The report includes the analysis of the regional as well as global air combat maneuvering instrumentation market trends, key players, market segments, application areas, and market growth strategies.

Additional benefits you will get with this purchase are:
● Quarterly Update and* (only available with a corporate license, on listed price)
● 5 additional Company Profile of client Choice pre- or Post-purchase, as a free update.
● Free Upcoming Version on the Purchase of Five and Enterprise User License.
● 16 analyst hours of support* (post-purchase, if you find additional data requirements upon review of the report, you may receive support amounting to 16 analyst hours to solve questions, and post-sale queries)
● 15% Free Customization* (in case the scope or segment of the report does not match your requirements, 15% is equivalent to 3 working days of free work, applicable once)
● Free data Pack on the Five and Enterprise User License. (Excel version of the report)
● Free Updated report if the report is 6-12 months old or older.
● 24-hour priority response*
● Free Industry updates and white papers.

Possible Customization with this report (with additional cost and timeline, please talk to the sales executive to know more)
● Additional company profiles with specific to client's interest
● SWOT Analysis
Key Market Segments
By Mode of Operation
● Non-Autonomous
● Autonomous
By Component
● Hardware
● Software
● Services
By System Type
● Real-Time
● Non Real-Time
By Application
● Military Training
● Weapons Development
● Ground Training
● LVC Training (Live, Virtual, Constructive)
● Others
By Region
● North America
○ U.S.
○ Canada
○ Mexico
● Europe
○ Germany
○ France
○ UK
○ Russia
○ Rest of Europe
● Asia-Pacific
○ China
○ Japan
○ India
○ South Korea
○ Rest of Asia-Pacific
● LAMEA
○ Latin America
○ Middle East
○ Africa
● Key Market Players
○ ADCOR MAGnet Systems
○ AEROTREE Group
○ Arotech Corporation
○ Cubic Corporation
○ Diehl Stiftung & Co. KG
○ Elbit Systems Ltd.
○ IAI (Israel Aerospace Industries)
○ L3Harris Technologies, Inc.
○ Leonardo S.p.A.
○ Prescient Systems & Technologies Pte Ltd.
○ RTX
○ Saab AB
○ SDT Space & Defence Technologies Inc.

ページTOPに戻る

Table of Contents

CHAPTER 1: INTRODUCTION
1.1. Report description
1.2. Key market segments
1.3. Key benefits to the stakeholders
1.4. Research methodology
1.4.1. Primary research
1.4.2. Secondary research
1.4.3. Analyst tools and models
CHAPTER 2: EXECUTIVE SUMMARY
2.1. CXO perspective
CHAPTER 3: MARKET OVERVIEW
3.1. Market definition and scope
3.2. Key findings
3.2.1. Top impacting factors
3.2.2. Top investment pockets
3.3. Porter’s five forces analysis
3.3.1. Moderate to high bargaining power of suppliers
3.3.2. Moderate to high threat of new entrants
3.3.3. Moderate threat of substitutes
3.3.4. Moderate to high intensity of rivalry
3.3.5. Moderate to high bargaining power of buyers
3.4. Market dynamics
3.4.1. Drivers
3.4.1.1. Rise in geopolitical tensions and defense spending
3.4.1.2. Increased focus on cybersecurity in ACMI for secure combat training
3.4.1.3. Technological advancements in ACMI systems
3.4.2. Restraints
3.4.2.1. High initial and maintenance costs
3.4.2.2. Complex system integration
3.4.3. Opportunities
3.4.3.1. Increase in focus on live, virtual, and constructive (LVC) training
3.4.3.2. Expansion of ACMI capabilities to support 5th generation aircraft
CHAPTER 4: AIR COMBAT MANEUVERING INSTRUMENTATION MARKET, BY MODE OF OPERATION
4.1. Overview
4.1.1. Market size and forecast
4.2. Non-Autonomous
4.2.1. Key market trends, growth factors and opportunities
4.2.2. Market size and forecast, by region
4.2.3. Market share analysis by country
4.3. Autonomous
4.3.1. Key market trends, growth factors and opportunities
4.3.2. Market size and forecast, by region
4.3.3. Market share analysis by country
CHAPTER 5: AIR COMBAT MANEUVERING INSTRUMENTATION MARKET, BY COMPONENT
5.1. Overview
5.1.1. Market size and forecast
5.2. Hardware
5.2.1. Key market trends, growth factors and opportunities
5.2.2. Market size and forecast, by region
5.2.3. Market share analysis by country
5.3. Software
5.3.1. Key market trends, growth factors and opportunities
5.3.2. Market size and forecast, by region
5.3.3. Market share analysis by country
5.4. Services
5.4.1. Key market trends, growth factors and opportunities
5.4.2. Market size and forecast, by region
5.4.3. Market share analysis by country
CHAPTER 6: AIR COMBAT MANEUVERING INSTRUMENTATION MARKET, BY SYSTEM TYPE
6.1. Overview
6.1.1. Market size and forecast
6.2. Real-Time
6.2.1. Key market trends, growth factors and opportunities
6.2.2. Market size and forecast, by region
6.2.3. Market share analysis by country
6.3. Non Real-Time
6.3.1. Key market trends, growth factors and opportunities
6.3.2. Market size and forecast, by region
6.3.3. Market share analysis by country
CHAPTER 7: AIR COMBAT MANEUVERING INSTRUMENTATION MARKET, BY APPLICATION
7.1. Overview
7.1.1. Market size and forecast
7.2. Military Training
7.2.1. Key market trends, growth factors and opportunities
7.2.2. Market size and forecast, by region
7.2.3. Market share analysis by country
7.3. Weapons Development
7.3.1. Key market trends, growth factors and opportunities
7.3.2. Market size and forecast, by region
7.3.3. Market share analysis by country
7.4. Ground Training
7.4.1. Key market trends, growth factors and opportunities
7.4.2. Market size and forecast, by region
7.4.3. Market share analysis by country
7.5. LVC Training (Live, Virtual, Constructive)
7.5.1. Key market trends, growth factors and opportunities
7.5.2. Market size and forecast, by region
7.5.3. Market share analysis by country
7.6. Others
7.6.1. Key market trends, growth factors and opportunities
7.6.2. Market size and forecast, by region
7.6.3. Market share analysis by country
CHAPTER 8: AIR COMBAT MANEUVERING INSTRUMENTATION MARKET, BY REGION
8.1. Overview
8.1.1. Market size and forecast By Region
8.2. North America
8.2.1. Key market trends, growth factors and opportunities
8.2.2. Market size and forecast, by Mode of Operation
8.2.3. Market size and forecast, by Component
8.2.4. Market size and forecast, by System Type
8.2.5. Market size and forecast, by Application
8.2.6. Market size and forecast, by country
8.2.6.1. U.S.
8.2.6.1.1. Market size and forecast, by Mode of Operation
8.2.6.1.2. Market size and forecast, by Component
8.2.6.1.3. Market size and forecast, by System Type
8.2.6.1.4. Market size and forecast, by Application
8.2.6.2. Canada
8.2.6.2.1. Market size and forecast, by Mode of Operation
8.2.6.2.2. Market size and forecast, by Component
8.2.6.2.3. Market size and forecast, by System Type
8.2.6.2.4. Market size and forecast, by Application
8.2.6.3. Mexico
8.2.6.3.1. Market size and forecast, by Mode of Operation
8.2.6.3.2. Market size and forecast, by Component
8.2.6.3.3. Market size and forecast, by System Type
8.2.6.3.4. Market size and forecast, by Application
8.3. Europe
8.3.1. Key market trends, growth factors and opportunities
8.3.2. Market size and forecast, by Mode of Operation
8.3.3. Market size and forecast, by Component
8.3.4. Market size and forecast, by System Type
8.3.5. Market size and forecast, by Application
8.3.6. Market size and forecast, by country
8.3.6.1. Germany
8.3.6.1.1. Market size and forecast, by Mode of Operation
8.3.6.1.2. Market size and forecast, by Component
8.3.6.1.3. Market size and forecast, by System Type
8.3.6.1.4. Market size and forecast, by Application
8.3.6.2. France
8.3.6.2.1. Market size and forecast, by Mode of Operation
8.3.6.2.2. Market size and forecast, by Component
8.3.6.2.3. Market size and forecast, by System Type
8.3.6.2.4. Market size and forecast, by Application
8.3.6.3. UK
8.3.6.3.1. Market size and forecast, by Mode of Operation
8.3.6.3.2. Market size and forecast, by Component
8.3.6.3.3. Market size and forecast, by System Type
8.3.6.3.4. Market size and forecast, by Application
8.3.6.4. Russia
8.3.6.4.1. Market size and forecast, by Mode of Operation
8.3.6.4.2. Market size and forecast, by Component
8.3.6.4.3. Market size and forecast, by System Type
8.3.6.4.4. Market size and forecast, by Application
8.3.6.5. Rest of Europe
8.3.6.5.1. Market size and forecast, by Mode of Operation
8.3.6.5.2. Market size and forecast, by Component
8.3.6.5.3. Market size and forecast, by System Type
8.3.6.5.4. Market size and forecast, by Application
8.4. Asia-Pacific
8.4.1. Key market trends, growth factors and opportunities
8.4.2. Market size and forecast, by Mode of Operation
8.4.3. Market size and forecast, by Component
8.4.4. Market size and forecast, by System Type
8.4.5. Market size and forecast, by Application
8.4.6. Market size and forecast, by country
8.4.6.1. China
8.4.6.1.1. Market size and forecast, by Mode of Operation
8.4.6.1.2. Market size and forecast, by Component
8.4.6.1.3. Market size and forecast, by System Type
8.4.6.1.4. Market size and forecast, by Application
8.4.6.2. Japan
8.4.6.2.1. Market size and forecast, by Mode of Operation
8.4.6.2.2. Market size and forecast, by Component
8.4.6.2.3. Market size and forecast, by System Type
8.4.6.2.4. Market size and forecast, by Application
8.4.6.3. India
8.4.6.3.1. Market size and forecast, by Mode of Operation
8.4.6.3.2. Market size and forecast, by Component
8.4.6.3.3. Market size and forecast, by System Type
8.4.6.3.4. Market size and forecast, by Application
8.4.6.4. South Korea
8.4.6.4.1. Market size and forecast, by Mode of Operation
8.4.6.4.2. Market size and forecast, by Component
8.4.6.4.3. Market size and forecast, by System Type
8.4.6.4.4. Market size and forecast, by Application
8.4.6.5. Rest of Asia-Pacific
8.4.6.5.1. Market size and forecast, by Mode of Operation
8.4.6.5.2. Market size and forecast, by Component
8.4.6.5.3. Market size and forecast, by System Type
8.4.6.5.4. Market size and forecast, by Application
8.5. LAMEA
8.5.1. Key market trends, growth factors and opportunities
8.5.2. Market size and forecast, by Mode of Operation
8.5.3. Market size and forecast, by Component
8.5.4. Market size and forecast, by System Type
8.5.5. Market size and forecast, by Application
8.5.6. Market size and forecast, by country
8.5.6.1. Latin America
8.5.6.1.1. Market size and forecast, by Mode of Operation
8.5.6.1.2. Market size and forecast, by Component
8.5.6.1.3. Market size and forecast, by System Type
8.5.6.1.4. Market size and forecast, by Application
8.5.6.2. Middle East
8.5.6.2.1. Market size and forecast, by Mode of Operation
8.5.6.2.2. Market size and forecast, by Component
8.5.6.2.3. Market size and forecast, by System Type
8.5.6.2.4. Market size and forecast, by Application
8.5.6.3. Africa
8.5.6.3.1. Market size and forecast, by Mode of Operation
8.5.6.3.2. Market size and forecast, by Component
8.5.6.3.3. Market size and forecast, by System Type
8.5.6.3.4. Market size and forecast, by Application
CHAPTER 9: COMPETITIVE LANDSCAPE
9.1. Introduction
9.2. Top winning strategies
9.3. Product mapping of top 10 player
9.4. Competitive dashboard
9.5. Competitive heatmap
9.6. Top player positioning, 2023
CHAPTER 10: COMPANY PROFILES
10.1. RTX
10.1.1. Company overview
10.1.2. Key executives
10.1.3. Company snapshot
10.1.4. Operating business segments
10.1.5. Product portfolio
10.1.6. Business performance
10.1.7. Key strategic moves and developments
10.2. Leonardo S.p.A.
10.2.1. Company overview
10.2.2. Key executives
10.2.3. Company snapshot
10.2.4. Operating business segments
10.2.5. Product portfolio
10.2.6. Business performance
10.2.7. Key strategic moves and developments
10.3. Elbit Systems Ltd.
10.3.1. Company overview
10.3.2. Key executives
10.3.3. Company snapshot
10.3.4. Operating business segments
10.3.5. Product portfolio
10.3.6. Business performance
10.3.7. Key strategic moves and developments
10.4. IAI (Israel Aerospace Industries)
10.4.1. Company overview
10.4.2. Key executives
10.4.3. Company snapshot
10.4.4. Operating business segments
10.4.5. Product portfolio
10.4.6. Business performance
10.5. L3Harris Technologies, Inc.
10.5.1. Company overview
10.5.2. Key executives
10.5.3. Company snapshot
10.5.4. Operating business segments
10.5.5. Product portfolio
10.5.6. Business performance
10.6. AEROTREE Group
10.6.1. Company overview
10.6.2. Key executives
10.6.3. Company snapshot
10.6.4. Operating business segments
10.6.5. Product portfolio
10.7. SDT Space & Defence Technologies Inc.
10.7.1. Company overview
10.7.2. Key executives
10.7.3. Company snapshot
10.7.4. Operating business segments
10.7.5. Product portfolio
10.7.6. Business performance
10.7.7. Key strategic moves and developments
10.8. Arotech Corporation
10.8.1. Company overview
10.8.2. Key executives
10.8.3. Company snapshot
10.8.4. Operating business segments
10.8.5. Product portfolio
10.9. Prescient Systems & Technologies Pte Ltd.
10.9.1. Company overview
10.9.2. Key executives
10.9.3. Company snapshot
10.9.4. Operating business segments
10.9.5. Product portfolio
10.10. Cubic Corporation
10.10.1. Company overview
10.10.2. Key executives
10.10.3. Company snapshot
10.10.4. Operating business segments
10.10.5. Product portfolio
10.10.6. Key strategic moves and developments
10.11. Saab AB
10.11.1. Company overview
10.11.2. Key executives
10.11.3. Company snapshot
10.11.4. Operating business segments
10.11.5. Product portfolio
10.11.6. Business performance
10.12. ADCOR MAGnet Systems
10.12.1. Company overview
10.12.2. Key executives
10.12.3. Company snapshot
10.12.4. Operating business segments
10.12.5. Product portfolio
10.13. Diehl Stiftung & Co. KG
10.13.1. Company overview
10.13.2. Key executives
10.13.3. Company snapshot
10.13.4. Operating business segments
10.13.5. Product portfolio
10.13.6. Business performance