Summary

The thermal spray coating equipment and services market is projected to grow from USD 14.0 billion in 2024 to USD 17.8 billion by 2030, at a CAGR of 4.1% from 2024 to 2030. The aerospace industry is a key driver of the thermal spray coating equipment and services market. Thermal spray coating equipment and services are commonly employed in aircraft engines, turbine blades, aerospace structures, and defense equipment to improve performance, reduce weight, and increase durability.

“By process, the combustion flame segment is estimated to be the largest segment of the thermal spray coating equipment and services market from 2024 to 2030.”
Based on the process, the combustion flame is estimated to be the largest segment during the forecast period. The combustion flame process facilitates excellent bond strength and adhesion between the coating and substrate. The high temperatures and velocity of the particles generated by the flame promote strong metallurgical bonding, resulting in a durable and resilient coating. This is particularly crucial for applications where the coating must withstand high temperatures, mechanical stress, or corrosive environments. Hence, these factors are propelling the market growth for the combustion flame segment.

“By material, ceramics is estimated to be the largest segment of the thermal spray coating equipment and services market from 2024 to 2030.”
Based on material, ceramics are projected to account for the highest share in the thermal spray coating equipment and services market during the projection period. Ceramic coatings provide high electrical insulating characteristics. They are utilized in situations that need low electrical conductivity or insulation. Examples are electrical components, circuit boards, and high-voltage insulators.

“From 2024 to 2030, by end-use, aerospace is expected to be the largest end-use segment in the thermal spray coating equipment and services market.”
Aerospace is estimated to account for the largest share in the thermal spray coating equipment and services market during the forecast period based on end-use. Thermal spray coatings are employed in thermal protection systems (TPS) for spacecraft and re-entry vehicles. TPS coatings, such as ablation and insulating materials, are designed to withstand extreme temperatures during atmospheric re-entry and protect the underlying structures from heat damage.
“The North America region's thermal spray coating equipment and services market is projected to witness the highest share during the forecast period.”
North America will register the greatest share in the thermal spray coating equipment and services market from 2024 to 2030. The automobile industry in North America is another significant driver of the thermal spray coating equipment and services market. Coatings are used on automobile components like engine parts, piston rings, and transmission systems to improve performance, reduce friction, and increase fuel economy. Thermal spray coatings are projected to become more prevalent in the automobile industry due to a greater demand for lightweight materials and improved engine performance.

Profile break-up of primary participants for the report:
• By Company Type: Tier 1 – 40%, Tier 2 – 20%, and Tier 3 – 40%
• By Designation: C-level Executives – 20%, Directors – 50%, and Others – 30%
• By Region: North America – 25%, Europe –15%, Asia Pacific – 30%, and Latin America-20%, Middle East & Africa-10%
The thermal spray coating equipment and services report is dominated by players such as

Linde AMT (US), OC Oerlikon Management AG (Switzerland), Höganäs AB (Sweden), Saint Gobain (US), and Curtiss-Wright Corporation (US), Ador Fontech Limited (India), Bodycote (UK), Curtiss-Wright Corporation (US), Kennametal Inc. (US), The Lincoln Electric Company (US), A&A Thermal Spray Coatings (US), Aimtek (US), Alloy Metal Surface Technologies (India), and Wall Colmonoy (US), and others.

Research Coverage:
The report defines, segments, and projects the thermal spray coating equipment and services market size based on product, process, end-use, and region. It strategically profiles the key players and comprehensively analyzes their market share and core competencies. It also tracks and analyzes competitive developments, such as expansions, agreements, and acquisitions undertaken by them in the market.

Reasons to Buy the Report:
The report is expected to help the market leaders/new entrants by providing them with the closest approximations of revenue numbers of the thermal spray coating equipment and services market and its segments. This report is also expected to help stakeholder businesses and the market’s competitive landscape better, gain insights to improve the position of their companies, and make suitable go-to-market strategies. It also enables stakeholders to understand the market’s pulse and provides information on key market drivers, restraints, challenges, and opportunities.

The report provides insights on the following pointers:
• Analysis of key drivers (growing demand from the healthcare industry, the reduced maintenance cost of thermally sprayed parts, thermal spray substituting electroplating processes, the boom in the aerospace industry), restraints (stringent regulations, fluctuations in raw material and energy prices), opportunities (use of new measures to conserve energy and harness renewable energy sources, adoption of automation and robotics), and challenges (lack of technical skills, high initial investments and operating costs) influencing the growth of the thermal spray coating equipment and services market.

• Market Development: Comprehensive information about lucrative markets – the report analyses
The thermal spray coating equipment and services market is across varied regions.

• Market Diversification: Exhaustive information about new products & services, untapped
geographies, recent developments, and investments in the thermal spray coating equipment and services market.

• Competitive Assessment: In-depth assessment of market shares, growth strategies, and service
offerings of leading players Linde AMT (US), OC Oerlikon Management AG (Switzerland), Höganäs AB (Sweden), Saint Gobain (US), and Curtiss-Wright Corporation (US), Ador Fontech Limited (India), Bodycote (UK), Curtiss-Wright Corporation (US), Kennametal Inc. (US), The Lincoln Electric Company (US), A&A Thermal Spray Coatings (US), Aimtek (US), Alloy Metal Surface Technologies (India), and Wall Colmonoy (US), among others in the thermal spray coating equipment and services

ページTOPに戻る

Table of Contents

1 INTRODUCTION 30
1.1 STUDY OBJECTIVES 30
1.2 MARKET DEFINITION 30
1.3 STUDY SCOPE 31
1.3.1 SEGMENTS CONSIDERED 31
1.3.2 INCLUSIONS & EXCLUSIONS 31
1.3.3 YEARS CONSIDERED 34
1.3.4 CURRENCY CONSIDERED 34
1.4 STAKEHOLDERS 34
2 RESEARCH METHODOLOGY 35
2.1 RESEARCH DATA 35
2.1.1 SECONDARY DATA 36
2.1.1.1 Key data from secondary sources 36
2.1.2 PRIMARY DATA 36
2.1.2.1 Key data from primary sources 37
2.1.2.2 Key industry insights 37
2.1.2.3 Breakdown of primary interviews 38
2.2 BASE NUMBER CALCULATIONS 38
2.3 FORECAST NUMBER CALCULATIONS 38
2.4 MARKET ENGINEERING 39
2.4.1 TOP-DOWN APPROACH 39
2.4.2 BOTTOM-UP APPROACH 39
2.5 DATA TRIANGULATION 40
2.6 STUDY ASSUMPTIONS 41
2.7 RESEARCH LIMITATIONS 41
3 EXECUTIVE SUMMARY 42
4 PREMIUM INSIGHTS 46
4.1 ATTRACTIVE OPPORTUNITIES IN THERMAL SPRAY COATING EQUIPMENT
AND SERVICES MARKET 46
4.2 THERMAL SPRAY COATING EQUIPMENT AND SERVICES MARKET, BY PROCESS 46
4.3 THERMAL SPRAY COATING EQUIPMENT AND SERVICES MARKET, BY COUNTRY 47
4.4 NORTH AMERICA: THERMAL SPRAY COATING EQUIPMENT AND SERVICES MARKET,
BY MATERIAL AND COUNTRY 48
 
5 MARKET OVERVIEW 49
5.1 INTRODUCTION 49
5.2 MARKET DYNAMICS 49
5.2.1 DRIVERS 50
5.2.1.1 Growing demand for thermal spray coatings from end-use industries 50
5.2.1.2 Increasing adoption in repair and refurbishment applications 51
5.2.1.3 Advancements in thermal spray technologies 51
5.2.2 RESTRAINTS 52
5.2.2.1 Stringent regulations 52
5.2.2.2 Fluctuations in raw material and energy prices 52
5.2.3 OPPORTUNITIES 52
5.2.3.1 Use of new measures to conserve and harness renewable
energy sources 52
5.2.3.2 Adoption of automation and robotics 53
5.2.4 CHALLENGES 53
5.2.4.1 Lack of technical skills 53
5.2.4.2 High initial investments and operating costs 54
5.3 PORTER’S FIVE FORCES ANALYSIS 54
5.3.1 THREAT OF NEW ENTRANTS 55
5.3.2 THREAT OF SUBSTITUTES 56
5.3.3 BARGAINING POWER OF SUPPLIERS 56
5.3.4 BARGAINING POWER OF BUYERS 56
5.3.5 INTENSITY OF COMPETITIVE RIVALRY 56
5.4 KEY STAKEHOLDERS AND BUYING CRITERIA 57
5.4.1 KEY STAKEHOLDERS IN BUYING PROCESS 57
5.4.2 KEY BUYING CRITERIA 58
5.5 TRENDS/DISRUPTIONS IMPACTING CUSTOMER BUSINESS 59
5.6 VALUE CHAIN ANALYSIS 59
5.7 REGULATORY LANDSCAPE 61
5.7.1 REGULATORY BODIES, GOVERNMENT AGENCIES,
AND OTHER ORGANIZATIONS 62
5.8 TRADE ANALYSIS 64
5.8.1 IMPORT ANALYSIS (HS CODE 8515) 65
5.8.2 EXPORT SCENARIO (HS CODE 8515) 65
5.9 TECHNOLOGY ANALYSIS 66
5.9.1 KEY TECHNOLOGIES 66
5.9.1.1 High-velocity oxy-fuel (HVOF) spraying 66
5.9.1.2 Cold spray technology 67
5.9.1.3 Plasma-transferred arc (PTA) coating 67
5.9.2 COMPLEMENTARY TECHNOLOGIES 68
5.9.2.1 Laser cladding 68
5.9.2.2 Surface metrology 68
5.9.2.3 Robotic automation 68
5.9.3 ADJACENT TECHNOLOGIES 69
5.9.3.1 Additive manufacturing (3D printing) 69
5.9.3.2 Heat treatment processes 69
5.9.3.3 Wear-resistant alloys 69
5.10 CASE STUDY ANALYSIS 70
5.10.1 USE OF THERMAL SPRAY COATINGS TO IMPROVE PERFORMANCE
AND LIFESPAN IN AEROSPACE INDUSTRY 70
5.10.2 USE OF THERMAL SPRAY COATINGS FOR CORROSION PROTECTION IN OFFSHORE OIL & GAS INDUSTRY 70
5.10.3 THERMAL SPRAY COATINGS FOR WEAR PROTECTION IN MINING EQUIPMENT 71
5.11 ECOSYSTEM ANALYSIS 72
5.11.1 ROLE IN ECOSYSTEM 73
5.12 PATENT ANALYSIS 74
5.12.1 LIST OF MAJOR PATENTS 74
5.13 KEY CONFERENCES AND EVENTS, 2024‒2025 76
5.14 INVESTMENTS AND FUNDING SCENARIO 77
5.15 PRICING ANALYSIS 78
5.15.1 AVERAGE SELLING PRICE, BY EQUIPMENT, 2023 78
5.15.2 AVERAGE COSTS OF THERMAL SPRAY COATING, 2020–2023 (USD/M²) 79
5.16 MACROECONOMIC OUTLOOK FOR THERMAL SPRAY COATING EQUIPMENT AND SERVICES MARKET 81
5.16.1 GLOBAL ECONOMIC GROWTH AND GDP TRENDS 81
5.16.2 PURCHASING POWER PARITY (PPP) 81
5.16.3 CHANGES IN ECONOMIC OUTPUT 81
5.16.4 INFLATION 82
5.16.5 INTEREST RATES 82
5.16.6 FOREIGN EXCHANGE RATES 82
5.16.7 BALANCE OF PAYMENTS 83
5.17 IMPACT OF AI/GEN AI ON THERMAL SPRAY COATING EQUIPMENT
AND SERVICES MARKET 83
5.17.1 PROCESS OPTIMIZATION 83
5.17.2 PREDICTIVE MAINTENANCE 83
5.17.3 QUALITY CONTROL AND DEFECT DETECTION 84
5.17.4 INNOVATION IN COATING MATERIALS AND TECHNIQUES 84
5.17.5 CUSTOMIZATION AND FLEXIBILITY 84
5.17.6 COST REDUCTION AND EFFICIENCY GAINS 84
5.17.7 ENHANCED DATA ANALYTICS AND DECISION-MAKING 84
 
6 THERMAL SPRAY COATING EQUIPMENT AND SERVICES MARKET,
BY PRODUCT 85
6.1 INTRODUCTION 86
6.2 MATERIALS 86
6.2.1 FAVORABLE GOVERNMENT INITIATIVES TO AID MARKET GROWTH 86
6.2.2 CERAMICS 88
6.2.2.1 Increased corrosion protection with high thermal and
electrical insulation to augment segment growth 88
6.2.2.2 Alumina 88
6.2.2.3 Zirconia 88
6.2.2.4 Yttria 88
6.2.3 METALS & ALLOYS 89
6.2.3.1 Increased resistance to corrosion, oxidation, and wear to
fuel segment growth 89
6.2.3.2 Nickel 90
6.2.3.3 Molybdenum 90
6.2.3.4 Aluminum 90
6.2.3.5 Cobalt 90
6.2.3.6 Zinc 90
6.2.4 CARBIDES 91
6.2.4.1 Increasing advancements in manufacturing sector to
spur market growth 91
6.2.5 COMPOSITES 92
6.2.5.1 Low weight and high specific strength to drive segment 92
6.2.6 OTHER MATERIALS 93
6.2.6.1 Resins 93
6.2.6.2 Polymers 93
6.3 EQUIPMENT 94
6.3.1 SUPERIOR COATING QUALITY, PRECISE CONTROL,
AND ENHANCED CUSTOMIZATION OPTIONS TO DRIVE MARKET 94
6.3.2 FLAME SPRAY EQUIPMENT 96
6.3.2.1 Cost-effectiveness and ease of operation to augment segment growth 96
6.3.3 PLASMA SPRAY EQUIPMENT 97
6.3.3.1 Industrial development with advanced manufacturing capabilities to drive adoption 97
6.3.4 HIGH-VELOCITY OXY-FUEL SPRAY EQUIPMENT 98
6.3.4.1 Need for high precision and durability in critical applications to aid segment growth 98
6.3.5 ELECTRIC ARC SPRAY EQUIPMENT 99
6.3.5.1 Growing automotive, construction, and marine sectors in emerging economies to favor market growth 99
 
6.3.6 HIGH-VELOCITY AIR-FUEL SPRAY EQUIPMENT 100
6.3.6.1 Ability to apply coatings with reduced oxidation and improved wear resistance to augment segment growth 100
6.3.7 COLD SPRAY EQUIPMENT 101
6.3.7.1 Need to create dense and oxide-free coatings without thermal distortion to boost segment growth 101
6.3.8 OTHER EQUIPMENT 102
6.4 SERVICES 103
6.4.1 RISING DEMAND FROM END-USE INDUSTRIES TO SURGE MARKET GROWTH 103
7 THERMAL SPRAY COATING EQUIPMENT AND SERVICES MARKET,
BY PROCESS 105
7.1 INTRODUCTION 106
7.2 COMBUSTION FLAME PROCESS 107
7.2.1 INCREASED NEED FOR COST-EFFECTIVE AND VERSATILE COATING SOLUTIONS TO SUPPORT MARKET GROWTH 107
7.2.2 WIRE FLAME SPRAYING 107
7.2.3 POWDER FLAME SPRAYING 107
7.2.4 DETONATION GUN SPRAYING 107
7.2.5 CERAMIC ROD SPRAYING 107
7.2.6 HIGH VELOCITY OXY-FUEL 107
7.3 ELECTRICAL PROCESS 108
7.3.1 INNOVATIVE SURFACE TREATMENTS TO REVOLUTIONIZE INDUSTRIAL APPLICATIONS OF ADVANCED ELECTRICAL PROCESSES 108
7.3.2 VACUUM PLASMA SPRAYING 108
7.3.3 ATMOSPHERIC PLASMA SPRAYING 109
7.3.4 ELECTRIC ARC WIRE SPRAYING 109
7.3.5 PLASMA SPRAYING 109
7.3.6 ARC SPRAYING 109
7.3.7 COLD GAS DYNAMIC SPRAY PROCESS 109
7.3.8 RADIOFREQUENCY PLASMA 109
7.3.9 TWO-WIRE ELECTRIC ARC SPRAYING 110
8 THERMAL SPRAY COATING EQUIPMENT AND SERVICES MARKET,
BY END-USE INDUSTRY 111
8.1 INTRODUCTION 112
8.2 AEROSPACE INDUSTRY 113
8.2.1 AEROSPACE TO COMMAND LARGEST END-USE INDUSTRY MARKET SHARE DURING STUDY PERIOD 113
8.2.2 FLAME TUBES 114
8.2.3 TURBINE BLADES 114
8.2.4 LANDING GEARS 115
 
8.3 AUTOMOTIVE INDUSTRY 116
8.3.1 INCREASED DEMAND FOR LIGHTWEIGHT ENGINE COMPONENTS TO
FUEL MARKET GROWTH 116
8.3.2 SUSPENSION PARTS 116
8.3.3 PISTON RINGS 116
8.3.4 TURBOCHARGERS 116
8.3.5 ENGINE PARTS 116
8.3.6 CHASSIS 116
8.3.7 CYLINDER LINERS 117
8.3.8 EXHAUST PIPES 117
8.4 HEALTHCARE INDUSTRY 118
8.4.1 RISING DEMAND FOR IMPLANTS TO SPUR MARKET GROWTH 118
8.4.2 ORTHOPEDICS 118
8.4.3 MEDICAL INSTRUMENTS 118
8.4.4 OVER-THE-COUNTER MEDICINES 118
8.5 ENERGY & POWER INDUSTRY 119
8.5.1 NEED FOR LOW MAINTENANCE AND PRODUCTION COSTS TO
BOOST MARKET GROWTH 119
8.5.2 BOILERS 119
8.5.3 SHAFTS 119
8.5.4 HYDRO TURBINES 119
8.5.5 POWER GENERATORS 120
8.5.6 COMPRESSOR BLADES 120
8.6 ELECTRONICS INDUSTRY 120
8.6.1 RISING DEMAND FOR CONSUMER ELECTRONICS TO SUPPORT MARKET GROWTH 120
8.6.2 ELECTRONIC ENCLOSURES 121
8.6.3 INSTRUMENT NUTS 121
8.6.4 MAGNETIC TAPES 121
8.6.5 DIELECTRIC COATINGS 121
8.6.6 SHIELDING 121
8.7 AGRICULTURAL MACHINERY INDUSTRY 122
8.7.1 INCREASING FOCUS ON ADVANCED AGRICULTURAL MACHINERY TO
DRIVE MARKET 122
8.7.2 HARVESTER BLADES 122
8.7.3 BALERS 122
8.7.4 COMPRESSORS 122
8.7.5 THRESHING COMPONENTS 123
8.7.6 AGRICULTURAL PUMPS AND WASTEWATER TREATMENT EQUIPMENT 123
8.8 RENEWABLE ENERGY SECTOR 124
8.8.1 GROWING DEMAND FOR DURABLE, EFFICIENT,
AND COST-EFFECTIVE SOLUTIONS TO PROPEL MARKET GROWTH 124
8.8.2 WIND ENERGY SECTOR 124
8.8.3 TIDAL ENERGY SECTOR 124
8.8.4 BIOMASS ENERGY SECTOR 125
8.8.5 GEOTHERMAL ENERGY SECTOR 125
8.8.6 FUEL CELL ENERGY SECTOR 126
8.8.7 HYDROGEN PRODUCTION SECTOR 126
8.9 OTHER END-USE INDUSTRIES 127
8.9.1 FOOD PROCESSING INDUSTRY 127
8.9.2 DEFENSE INDUSTRY 128
8.9.3 PRINTING INDUSTRY 128
9 THERMAL SPRAY COATING EQUIPMENT AND SERVICES MARKET, BY REGION 129
9.1 INTRODUCTION 130
9.2 EUROPE 130
9.2.1 GERMANY 135
9.2.1.1 Increasing R&D investments in automobile industry to
propel market growth 135
9.2.2 UK 136
9.2.2.1 Increased government investments and favorable policies in electronics industry to fuel market growth 136
9.2.3 RUSSIA 138
9.2.3.1 Growing automotive and aerospace industries to aid market growth 138
9.2.4 ITALY 139
9.2.4.1 Increased investments in healthcare and renewable energy sectors to boost market growth 139
9.2.5 FRANCE 141
9.2.5.1 Growth of automotive industry and favorable government policies to support market growth 141
9.2.6 BELGIUM 142
9.2.6.1 Developing medical devices market and growing aerospace sector to focus on market growth 142
9.2.7 REST OF EUROPE 144
9.3 ASIA PACIFIC 145
9.3.1 CHINA 148
9.3.1.1 Massive industrial growth and urbanization to drive market 148
9.3.2 JAPAN 150
9.3.2.1 Technologically advanced manufacturing base and increased investments in aviation sector to propel market growth 150
9.3.3 INDIA 151
9.3.3.1 Growth in automotive and aerospace industries to augment market growth 151
9.3.4 SOUTH KOREA 153
9.3.4.1 Technological advancements in electronics sector and favorable government initiatives to support market growth 153
 
9.3.5 VIETNAM 154
9.3.5.1 Increasing investments in advanced manufacturing technologies to spur market growth 154
9.3.6 REST OF ASIA PACIFIC 155
9.4 NORTH AMERICA 156
9.4.1 US 160
9.4.1.1 US to command largest market share in North American market during study period 160
9.4.2 CANADA 161
9.4.2.1 Increase in private and public investments and developed aerospace and oil & gas sectors to drive market 161
9.4.3 MEXICO 163
9.4.3.1 Increased private investments in automotive industry and high government focus on renewable energy to aid market growth 163
9.5 LATIN AMERICA 164
9.5.1 BRAZIL 167
9.5.1.1 High population and favorable industrial policies to drive market 167
9.5.2 COLOMBIA 168
9.5.2.1 Rising government investments in automotive, healthcare, and aerospace manufacturing industries to spur market growth 168
9.5.3 ARGENTINA 170
9.5.3.1 Increasing FDI and rising investments in renewable energy sector to propel market growth 170
9.5.4 REST OF LATIN AMERICA 171
9.6 MIDDLE EAST & AFRICA 172
9.6.1 SAUDI ARABIA 176
9.6.1.1 Growth in oil & gas and petroleum industries to augment market growth 176
9.6.2 UAE 177
9.6.2.1 Rise in healthcare expenditure and growth in aviation sector to
drive market 177
9.6.3 REST OF GCC COUNTRIES 179
9.6.4 SOUTH AFRICA 180
9.6.4.1 Increased investments in manufacturing sector to propel market growth 180
9.6.5 EGYPT 182
9.6.5.1 Increased focus on development of renewable energy and
healthcare sectors to drive market 182
9.6.6 REST OF MIDDLE EAST & AFRICA 183
10 COMPETITIVE LANDSCAPE 185
10.1 INTRODUCTION 185
10.2 KEY PLAYER STRATEGY/RIGHT TO WIN 185
10.2.1 OVERVIEW OF STRATEGIES ADOPTED BY PLAYERS IN
THERMAL SPRAY COATING EQUIPMENT AND SERVICES MARKET 185
10.3 REVENUE ANALYSIS, 2019–2023 187
10.4 MARKET SHARE ANALYSIS, 2023 187
10.4.1 RANKING OF KEY MARKET PLAYERS, 2023 188
10.5 BRAND/PRODUCT COMPARISON 190
10.5.1 LINDE AMT 191
10.5.2 OC OERLIKON MANAGEMENT AG 191
10.5.3 HÖGANÄS AB 191
10.5.4 SAINT-GOBIN 191
10.5.5 CURTISS-WRIGHT CORPORATION 191
10.6 COMPANY EVALUATION MATRIX: KEY PLAYERS, 2023 192
10.6.1 STARS 192
10.6.2 EMERGING LEADERS 192
10.6.3 PERVASIVE PLAYERS 192
10.6.4 PARTICIPANTS 192
10.6.5 COMPANY FOOTPRINT: KEY PLAYERS, 2023 194
10.6.5.1 Company footprint 194
10.6.5.2 Product footprint 195
10.6.5.3 Process footprint 196
10.6.5.4 End-use industry footprint 197
10.6.5.5 Region footprint 198
10.7 COMPANY EVALUATION MATRIX: STARTUPS/SMES, 2023 198
10.7.1 PROGRESSIVE COMPANIES 199
10.7.2 RESPONSIVE COMPANIES 199
10.7.3 DYNAMIC COMPANIES 199
10.7.4 STARTING BLOCKS 199
10.7.5 COMPETITIVE BENCHMARKING: STARTUPS/SMES, 2023 201
10.8 COMPANY VALUATION AND FINANCIAL METRICS 202
10.8.1 COMPANY VALUATION 202
10.8.2 FINANCIAL METRICS 202
10.9 COMPETITIVE SCENARIO 203
10.9.1 PRODUCT LAUNCHES 203
10.9.2 DEALS 205
10.9.3 EXPANSIONS 206
11 COMPANY PROFILE 208
11.1 KEY PLAYERS 208
11.1.1 LINDE AMT 208
11.1.1.1 Business overview 208
11.1.1.2 Products/Services offered 209
11.1.1.3 MnM view 211
11.1.1.3.1 Right to win 211
11.1.1.3.2 Strategic choices 211
11.1.1.3.3 Weaknesses and competitive threats 211
11.1.2 OC OERLIKON MANAGEMENT AG 212
11.1.2.1 Business overview 212
11.1.2.2 Products/Services offered 213
11.1.2.3 Recent developments 215
11.1.2.3.1 Deals 215
11.1.2.3.2 Expansions 216
11.1.2.4 MnM view 217
11.1.2.4.1 Right to win 217
11.1.2.4.2 Strategic choices 217
11.1.2.4.3 Weaknesses and competitive threats 217
11.1.3 BODYCOTE 218
11.1.3.1 Business overview 218
11.1.3.2 Products/Services offered 219
11.1.3.3 Recent development 221
11.1.3.3.1 Deals 221
11.1.3.3.2 Expansions 221
11.1.3.4 MnM view 222
11.1.3.4.1 Right to win 222
11.1.3.4.2 Strategic choices 222
11.1.3.4.3 Weaknesses and competitive threats 222
11.1.4 A&A THERMAL SPRAY COATINGS 223
11.1.4.1 Business overview 223
11.1.4.2 Products/Services offered 224
11.1.5 HANNECARD 225
11.1.5.1 Business overview 225
11.1.5.2 Products/Services Offered 225
11.1.5.3 Recent developments 227
11.1.5.3.1 Product launches 227
11.1.5.3.2 Deals 227
11.1.6 ADOR FONTECH LIMITED 229
11.1.6.1 Business overview 229
11.1.6.2 Products/Services offered 230
11.1.7 CURTISS-WRIGHT CORPORATION 232
11.1.7.1 Business overview 232
11.1.7.2 Products/Services offered 233
11.1.7.3 Recent developments 235
11.1.7.3.1 Product launches 235
11.1.7.3.2 Deals 235
11.1.7.3.3 Expansions 236
 
11.1.8 HÖGANÄS AB 237
11.1.8.1 Business overview 237
11.1.8.2 Products/Services offered 237
11.1.8.3 Recent developments 238
11.1.8.3.1 Product launches 238
11.1.8.3.2 Deals 238
11.1.8.3.3 Expansions 239
11.1.9 WALL COLMONOY 240
11.1.9.1 Business overview 240
11.1.9.2 Products/Services offered 240
11.1.10 KENNAMETAL INC. 241
11.1.10.1 Business overview 241
11.1.10.2 Products/Services offered 242
11.1.11 SAINT-GOBAIN 244
11.1.11.1 Business overview 244
11.1.11.2 Products/Services offered 245
11.1.12 THE LINCOLN ELECTRIC COMPANY 247
11.1.12.1 Business overview 247
11.1.12.2 Products/Services offered 248
11.1.12.3 Recent developments 249
11.1.12.3.1 Product launches 249
11.1.12.3.2 Deals 249
11.1.13 FISHER BARTON 250
11.1.13.1 Business overview 250
11.1.13.2 Products/Services offered 250
11.1.14 GENERAL MAGNAPLATE CORPORATION 252
11.1.14.1 Business overview 252
11.1.14.2 Products/Services offered 252
11.1.15 SURFACE TECHNOLOGY 253
11.1.15.1 Business overview 253
11.1.15.2 Products/Services offered 253
11.1.15.3 Recent developments 254
11.1.15.3.1 Product launches 254
11.1.15.3.2 Deals 255
11.1.16 BRYCOAT INC. 256
11.1.16.1 Business overview 256
11.1.16.2 Products/Services offered 257
11.1.17 FLAME SPRAY TECHNOLOGIES B.V. 258
11.1.17.1 Business overview 258
11.1.17.2 Products/Services offered 258
 
11.2 OTHER PLAYERS 260
11.2.1 POLYMET 260
11.2.2 PROGRESSIVE SURFACE 261
11.2.3 EXLINE, INC. 262
11.2.4 GTV VERSCHLEIßSCHUTZ GMBH 263
11.2.5 AIMTEK, INC. 264
11.2.6 ALLOY METAL SURFACE TECHNOLOGIES 265
11.2.7 TSS SRL 266
11.2.8 CASTOLIN EUTECTIC 267
11.2.9 COAKEN TECHNO CO., LTD. 268
11.2.10 ELMET TECHNOLOGIES 269
11.2.11 APS MATERIALS, INC. 270
11.2.12 KERMETICO INC. 271
11.2.13 KYMERA INTERNATIONAL 272
11.2.14 PLASMA PROCESSES, LLC 273
12 ADJACENT AND RELATED MARKETS 274
12.1 INTRODUCTION 274
12.2 MARKET INSIGHT LIMITATIONS 274
12.3 INTERCONNECTED MARKETS 274
12.3.1 CELLULOSE ETHER & DERIVATIVES MARKET 274
12.3.1.1 Market definition 274
12.3.1.2 Market overview 274
12.3.1.3 Hard coatings market, by end-use industry 276
12.4 GENERAL MANUFACTURING 277
12.4.1 ENHANCED DURABILITY AND WEAR RESISTANCE TO DRIVE ADOPTION 277
12.5 TRANSPORTATION 279
12.5.1 ENHANCED DURABILITY, REDUCED MAINTENANCE, AND IMPROVED PERFORMANCE TO DRIVE MARKET 279
12.5.2 AUTOMOTIVE 279
12.5.3 MARINE 280
12.5.4 AEROSPACE 280
12.5.5 RAILROAD 280
12.6 MEDICAL/DENTAL EQUIPMENT 282
12.6.1 WEAR RESISTANCE, LONGEVITY, AND OPTIMAL PERFORMANCE TO DRIVE MARKET 282
12.7 BUILDING & ARCHITECTURE (INCLUDES HOME FURNISHINGS) 284
12.7.1 ELEVATING DURABILITY AND CORROSION RESISTANCE FOR PROLONGED INFRASTRUCTURE INTEGRITY TO DRIVE MARKET 284
12.8 FOOD MANUFACTURING/PREPARATION EQUIPMENT 286
12.8.1 ENHANCED EQUIPMENT LONGEVITY AND COMPLIANCE WITH HYGIENIC PROCESSING STANDARDS TO DRIVE MARKET 286
 
12.9 SPORTING EQUIPMENT 288
12.9.1 DURABILITY AND ENHANCED PERFORMANCE TO DRIVE MARKET 288
12.10 OTHER END-USE INDUSTRIES 290
13 APPENDIX 292
13.1 DISCUSSION GUIDE 292
13.2 KNOWLEDGESTORE: MARKETSANDMARKETS’ SUBSCRIPTION PORTAL 297
13.3 CUSTOMIZATION OPTIONS 299
13.4 RELATED REPORTS 299
13.5 AUTHOR DETAILS 300