Summary

The global adiabatic cooler market was valued at $626.8 million in 2022, and is projected to reach $1,025.9 million by 2032, registering a CAGR of 4.9%. Adiabatic coolers operate on the basis of reducing the pressure applied to a mass of air, and the air in the mass is allowed to expand; as volume increases, air temperature decreases as its internal energy decreases. The fan pushes air across the coil of an adiabatic air cooler. As the heated air comes into contact with the wetted pad or water spray, the air temperature is decreased adiabatically, allowing sensible cooling of the coil below environment dry bulb temperature. The ambient temperature is lower than the set point for the fluid getting cooled, and the cooler enters dry mode, with the fans drawing ambient air across the coil to cool it.

Increase in demand for adiabatic cooler in industries, such as industrial manufacturing and oil & gas industries, drives market growth. In addition, factors such as industrial growth, technological advancement, energy efficiency requirements, and the need for sustainable cooling solutions contribute to the growth of the market. The adiabatic cooler uses wet pads to pre-cool the ambient air entering the tower. Pre-cooling helps to achieve a lower temperature than the ambient dry bulb temperature. This pre-cooled air is then used to cool process water or any other refrigerant. Achieving a cold-air temperature lower than dry bulb temperature is not possible in standard dry cooling systems, which is a major advantage of adiabatic coolers. In addition, depending on the mode of operation (water saving or energy saving), the in-built control systems autonomously regulate fan speed. Moreover, the growth in the industrial manufacturing sector has largely been aided by the rise in demand for manufactured goods and is expected to boost the adiabatic coolers market.

The adiabatic cooler market is segmented on the basis of product type, orientation, end-user industry, and region. By product type, the market is categorized into dry air coolers and liquid coolers. On the basis of orientation, it is bifurcated into V-type and horizontal. And on the basis of end-user industry, the market is classified into oil & gas, industrial manufacturing, chemical & petrochemical, food & beverage, and others.
Region wise, the market is analyzed across North America, Europe, Asia-Pacific, and LAMEA. Asia-Pacific dominated the market in 2020, accounting for the highest share, and LAMEA is anticipated to grow at the highest CAGR during the forecast period. This is attributed to the growing industrialization in the region.

The major players that operate in the global adiabatic cooler market have adopted key strategies such as product launch and product development to strengthen their market outreach and sustain the stiff competition in the market. For instance, in September 2023, FRIGEL FIRENZE S.p. A. launched an adiabatic cooler equipped with pre-cooler pads, ensuring not only exceptional thermal efficiency, however, also safe operation. The next-generation Ecodry 4DK is a groundbreaking solution in the field of efficient cooling, particularly suited for applications where traditional open cooling towers face challenges related to water consumption, treatment, and the risk of Legionella contamination.

COMPETITION ANALYSIS
Key companies profiled in the adiabatic cooler market report include ALFA LAVAL, Baltimore Aircoil Company Inc., EVAPCO, Inc., Guntner Group, FRIGEL FIRENZE S.p.A., ICS Cool Energy Limited, MITA Group, SPX Cooling Technologies, Thermax Limited, and Vistech Cooling Systems.

KEY BENEFITS FOR STAKEHOLDERS
The report provides an extensive analysis of the current and emerging adiabatic cooler market trends and dynamics.
In-depth adiabatic cooler market analysis is conducted by constructing market estimations for the key market segments between 2020 and 2032.
Extensive analysis of the adiabatic cooler market is conducted by following key product positioning and monitoring of the top competitors within the market framework.
A comprehensive analysis of all regions is provided to determine the prevailing opportunities.
The Adiabatic Cooler Market forecast analysis from 2023 to 2032 is included in the report.
The key market players within the adiabatic cooler market are profiled in this report and their strategies are analyzed thoroughly, which help understand the competitive outlook of the adiabatic cooler industry.

Additional benefits you will get with this purchase are:
● Quarterly Update and* (only available with a corporate license, on listed price)
● 5 additional Company Profile of client Choice pre- or Post-purchase, as a free update.
● Free Upcoming Version on the Purchase of Five and Enterprise User License.
● 16 analyst hours of support* (post-purchase, if you find additional data requirements upon review of the report, you may receive support amounting to 16 analyst hours to solve questions, and post-sale queries)
● 15% Free Customization* (in case the scope or segment of the report does not match your requirements, 15% is equivalent to 3 working days of free work, applicable once)
● Free data Pack on the Five and Enterprise User License. (Excel version of the report)
● Free Updated report if the report is 6-12 months old or older.
● 24-hour priority response*
● Free Industry updates and white papers.

Possible Customization with this report (with additional cost and timeline, please talk to the sales executive to know more)
● Analysis of raw material in a product (by %)
● Manufacturing Capacity
● Investment Opportunities
● Supply Chain Analysis & Vendor Margins
● Upcoming/New Entrant by Regions
● Technology Trend Analysis
● Go To Market Strategy
● Market share analysis of players by products/segments
● Pain Point Analysis
● Additional company profiles with specific to client's interest
● Additional country or region analysis- market size and forecast
● Average Selling Price Analysis / Price Point Analysis
● Brands Share Analysis
● Criss-cross segment analysis- market size and forecast
● Expanded list for Company Profiles
● Historic market data
● Import Export Analysis/Data
● Key player details (including location, contact details, supplier/vendor network etc. in excel format)
● List of customers/consumers/raw material suppliers- value chain analysis
● Market share analysis of players at global/region/country level
● Per Capita Consumption Trends
● Product Consumption Analysis
● Reimbursement Scenario
● SWOT Analysis
● Volume Market Size and Forecast
Key Market Segments
By Product Type
● Dry Air Cooler
● Liquid Cooler
By End-User Industry
● Oil and Gas
● Industrial Manufacturing
● Chemical and Petrochemical
● Food and Beverages
● Others
By Orientation
● V Type
● Horizontal
By Region
● North America
○ U.S.
○ Canada
○ Mexico
● Europe
○ Germany
○ UK
○ France
○ Italy
○ Rest of Europe
● Asia-Pacific
○ China
○ Japan
○ South Korea
○ India
○ Rest of Asia-Pacific
● LAMEA
○ Latin America
○ Middle East
○ Africa
● Key Market Players
○ ALFA LAVAL
○ EVAPCO, Inc.
○ Thermax Limited
○ ICS Cool Energy Limited
○ SPX Cooling Technologies
○ Guntner Group
○ Baltimore Aircoil Company Inc.
○ FRIGEL FIRENZE S.p.A.
○ MITA Group
○ Vistech Cooling Systems

ページTOPに戻る

Table of Contents

CHAPTER 1: INTRODUCTION
1.1. Report description
1.2. Key market segments
1.3. Key benefits to the stakeholders
1.4. Research methodology
1.4.1. Primary research
1.4.2. Secondary research
1.4.3. Analyst tools and models
CHAPTER 2: EXECUTIVE SUMMARY
2.1. CXO Perspective
CHAPTER 3: MARKET OVERVIEW
3.1. Market definition and scope
3.2. Key findings
3.2.1. Top impacting factors
3.2.2. Top investment pockets
3.3. Porter’s five forces analysis
3.3.1. Low bargaining power of suppliers
3.3.2. Low threat of new entrants
3.3.3. Low threat of substitutes
3.3.4. Low intensity of rivalry
3.3.5. Low bargaining power of buyers
3.4. Market dynamics
3.4.1. Drivers
3.4.1.1. Rapid industrialization in developing countries
3.4.1.2. Growth of the food and beverages sector
3.4.2. Restraints
3.4.2.1. High initial cost
3.4.3. Opportunities
3.4.3.1. Technological advancements in adiabatic coolers
CHAPTER 4: ADIABATIC COOLER MARKET, BY PRODUCT TYPE
4.1. Overview
4.1.1. Market size and forecast
4.2. Dry Air Cooler
4.2.1. Key market trends, growth factors and opportunities
4.2.2. Market size and forecast, by region
4.2.3. Market share analysis by country
4.3. Liquid Cooler
4.3.1. Key market trends, growth factors and opportunities
4.3.2. Market size and forecast, by region
4.3.3. Market share analysis by country
CHAPTER 5: ADIABATIC COOLER MARKET, BY END-USER INDUSTRY
5.1. Overview
5.1.1. Market size and forecast
5.2. Oil and Gas
5.2.1. Key market trends, growth factors and opportunities
5.2.2. Market size and forecast, by region
5.2.3. Market share analysis by country
5.3. Industrial Manufacturing
5.3.1. Key market trends, growth factors and opportunities
5.3.2. Market size and forecast, by region
5.3.3. Market share analysis by country
5.4. Chemical and Petrochemical
5.4.1. Key market trends, growth factors and opportunities
5.4.2. Market size and forecast, by region
5.4.3. Market share analysis by country
5.5. Food and Beverages
5.5.1. Key market trends, growth factors and opportunities
5.5.2. Market size and forecast, by region
5.5.3. Market share analysis by country
5.6. Others
5.6.1. Key market trends, growth factors and opportunities
5.6.2. Market size and forecast, by region
5.6.3. Market share analysis by country
CHAPTER 6: ADIABATIC COOLER MARKET, BY ORIENTATION
6.1. Overview
6.1.1. Market size and forecast
6.2. V Type
6.2.1. Key market trends, growth factors and opportunities
6.2.2. Market size and forecast, by region
6.2.3. Market share analysis by country
6.3. Horizontal
6.3.1. Key market trends, growth factors and opportunities
6.3.2. Market size and forecast, by region
6.3.3. Market share analysis by country
CHAPTER 7: ADIABATIC COOLER MARKET, BY REGION
7.1. Overview
7.1.1. Market size and forecast By Region
7.2. North America
7.2.1. Key market trends, growth factors and opportunities
7.2.2. Market size and forecast, by Product Type
7.2.3. Market size and forecast, by End-User Industry
7.2.4. Market size and forecast, by Orientation
7.2.5. Market size and forecast, by country
7.2.5.1. U.S.
7.2.5.1.1. Market size and forecast, by Product Type
7.2.5.1.2. Market size and forecast, by End-User Industry
7.2.5.1.3. Market size and forecast, by Orientation
7.2.5.2. Canada
7.2.5.2.1. Market size and forecast, by Product Type
7.2.5.2.2. Market size and forecast, by End-User Industry
7.2.5.2.3. Market size and forecast, by Orientation
7.2.5.3. Mexico
7.2.5.3.1. Market size and forecast, by Product Type
7.2.5.3.2. Market size and forecast, by End-User Industry
7.2.5.3.3. Market size and forecast, by Orientation
7.3. Europe
7.3.1. Key market trends, growth factors and opportunities
7.3.2. Market size and forecast, by Product Type
7.3.3. Market size and forecast, by End-User Industry
7.3.4. Market size and forecast, by Orientation
7.3.5. Market size and forecast, by country
7.3.5.1. Germany
7.3.5.1.1. Market size and forecast, by Product Type
7.3.5.1.2. Market size and forecast, by End-User Industry
7.3.5.1.3. Market size and forecast, by Orientation
7.3.5.2. UK
7.3.5.2.1. Market size and forecast, by Product Type
7.3.5.2.2. Market size and forecast, by End-User Industry
7.3.5.2.3. Market size and forecast, by Orientation
7.3.5.3. France
7.3.5.3.1. Market size and forecast, by Product Type
7.3.5.3.2. Market size and forecast, by End-User Industry
7.3.5.3.3. Market size and forecast, by Orientation
7.3.5.4. Italy
7.3.5.4.1. Market size and forecast, by Product Type
7.3.5.4.2. Market size and forecast, by End-User Industry
7.3.5.4.3. Market size and forecast, by Orientation
7.3.5.5. Rest of Europe
7.3.5.5.1. Market size and forecast, by Product Type
7.3.5.5.2. Market size and forecast, by End-User Industry
7.3.5.5.3. Market size and forecast, by Orientation
7.4. Asia-Pacific
7.4.1. Key market trends, growth factors and opportunities
7.4.2. Market size and forecast, by Product Type
7.4.3. Market size and forecast, by End-User Industry
7.4.4. Market size and forecast, by Orientation
7.4.5. Market size and forecast, by country
7.4.5.1. China
7.4.5.1.1. Market size and forecast, by Product Type
7.4.5.1.2. Market size and forecast, by End-User Industry
7.4.5.1.3. Market size and forecast, by Orientation
7.4.5.2. Japan
7.4.5.2.1. Market size and forecast, by Product Type
7.4.5.2.2. Market size and forecast, by End-User Industry
7.4.5.2.3. Market size and forecast, by Orientation
7.4.5.3. South Korea
7.4.5.3.1. Market size and forecast, by Product Type
7.4.5.3.2. Market size and forecast, by End-User Industry
7.4.5.3.3. Market size and forecast, by Orientation
7.4.5.4. India
7.4.5.4.1. Market size and forecast, by Product Type
7.4.5.4.2. Market size and forecast, by End-User Industry
7.4.5.4.3. Market size and forecast, by Orientation
7.4.5.5. Rest of Asia-Pacific
7.4.5.5.1. Market size and forecast, by Product Type
7.4.5.5.2. Market size and forecast, by End-User Industry
7.4.5.5.3. Market size and forecast, by Orientation
7.5. LAMEA
7.5.1. Key market trends, growth factors and opportunities
7.5.2. Market size and forecast, by Product Type
7.5.3. Market size and forecast, by End-User Industry
7.5.4. Market size and forecast, by Orientation
7.5.5. Market size and forecast, by country
7.5.5.1. Latin America
7.5.5.1.1. Market size and forecast, by Product Type
7.5.5.1.2. Market size and forecast, by End-User Industry
7.5.5.1.3. Market size and forecast, by Orientation
7.5.5.2. Middle East
7.5.5.2.1. Market size and forecast, by Product Type
7.5.5.2.2. Market size and forecast, by End-User Industry
7.5.5.2.3. Market size and forecast, by Orientation
7.5.5.3. Africa
7.5.5.3.1. Market size and forecast, by Product Type
7.5.5.3.2. Market size and forecast, by End-User Industry
7.5.5.3.3. Market size and forecast, by Orientation
CHAPTER 8: COMPETITIVE LANDSCAPE
8.1. Introduction
8.2. Top winning strategies
8.3. Product mapping of top 10 player
8.4. Competitive dashboard
8.5. Competitive heatmap
8.6. Top player positioning, 2022
CHAPTER 9: COMPANY PROFILES
9.1. ALFA LAVAL
9.1.1. Company overview
9.1.2. Key executives
9.1.3. Company snapshot
9.1.4. Operating business segments
9.1.5. Product portfolio
9.1.6. Business performance
9.2. Baltimore Aircoil Company Inc.
9.2.1. Company overview
9.2.2. Key executives
9.2.3. Company snapshot
9.2.4. Operating business segments
9.2.5. Product portfolio
9.2.6. Key strategic moves and developments
9.3. EVAPCO, Inc.
9.3.1. Company overview
9.3.2. Key executives
9.3.3. Company snapshot
9.3.4. Operating business segments
9.3.5. Product portfolio
9.4. FRIGEL FIRENZE S.p.A.
9.4.1. Company overview
9.4.2. Key executives
9.4.3. Company snapshot
9.4.4. Operating business segments
9.4.5. Product portfolio
9.4.6. Key strategic moves and developments
9.5. ICS Cool Energy Limited
9.5.1. Company overview
9.5.2. Key executives
9.5.3. Company snapshot
9.5.4. Operating business segments
9.5.5. Product portfolio
9.6. SPX Cooling Technologies
9.6.1. Company overview
9.6.2. Key executives
9.6.3. Company snapshot
9.6.4. Operating business segments
9.6.5. Product portfolio
9.7. Thermax Limited
9.7.1. Company overview
9.7.2. Key executives
9.7.3. Company snapshot
9.7.4. Operating business segments
9.7.5. Product portfolio
9.7.6. Business performance
9.8. MITA Group
9.8.1. Company overview
9.8.2. Key executives
9.8.3. Company snapshot
9.8.4. Operating business segments
9.8.5. Product portfolio
9.8.6. Key strategic moves and developments
9.9. Guntner Group
9.9.1. Company overview
9.9.2. Key executives
9.9.3. Company snapshot
9.9.4. Operating business segments
9.9.5. Product portfolio
9.9.6. Key strategic moves and developments
9.10. Vistech Cooling Systems
9.10.1. Company overview
9.10.2. Key executives
9.10.3. Company snapshot
9.10.4. Operating business segments
9.10.5. Product portfolio