Summary

Global extruders market to reach USD 12 billion by 2027.
Global extruders market is valued approximately at USD 8.9 billion in 2020 and is anticipated to grow with a healthy growth rate of about 4.4% over the forecast period 2021-2027. Extruders are machines that are used for the production of long continuous products such as tire treads, tubing, wire coverings and others. These machines are also used for the production of various profiles that can be further cut to length. A range of extruders are available such as single-screw, twin-screw and ram extruders. The demand for extruders is expected to be highest in the building & construction sector. Increasing demand for extruded products such as door frames, windows, space frame systems, curtain walling, canopies, roofing & exterior cladding, and arches is driving the extruders demand in the building & construction sector. The global extruders market is being driven by high investment in building & construction industry and growing demand for plastic and metal products. Furthermore, rise in automation will provide new opportunities for the global extruders industry. As per Statista, the total spending in the construction industry across the globe is expected to increase from USD 9.5 trillion in 2014 to approximately USD 19.2 trillion by 2035. Such growth in the construction spending across the globe is expected to increase the demand, adoption and application of extruders in the building and construction sector and hence promote the market growth. However, high initial and maintenance cost of machines may impede market growth over the forecast period of 2021-2027.

The regional analysis of the global extruders market is considered for the key regions such as Asia Pacific, North America, Europe, Latin America, and Rest of the World. Asia Pacific accounts for the largest share in terms of market revenue in the global extruders market over the forecast period 2021-2027. Factors such as high economic growth rate, heavy investments across industries such as automotive, infrastructure, oil & gas, chemical, and electronics, expansion of building & construction industry, low cost of production, etc. contribute towards the largest market share of the region in the forecast years.

Major market player included in this report are:
Hillenbrand, Inc.
Shibaura Machine Co. Ltd. (Toshiba Machine Co. Ltd)
The Japan Steel Works Ltd.
Kraussmaffei Group Gmbh
Battenfeld-Cincinnati
NFM
Clextral
Leistritz AG
Davis-Standard LLC
Boco Pardubice Machines S.R.O.

The objective of the study is to define market sizes of different segments & countries in recent years and to forecast the values to the coming eight years. The report is designed to incorporate both qualitative and quantitative aspects of the industry within each of the regions and countries involved in the study. Furthermore, the report also caters the detailed information about the crucial aspects such as driving factors & challenges which will define the future growth of the market. Additionally, the report shall also incorporate available opportunities in micro markets for stakeholders to invest along with the detailed analysis of competitive landscape and product offerings of key players. The detailed segments and sub-segment of the market are explained below:

By Extruder Type:
Single-Screw Extruder
Twin-Screw Extruder
Ram Extruder
By End-Use Industry:
Building & Construction
Transportation
Consumer Goods
Others
By Region:
North America
U.S.
Canada
Europe
UK
Germany
France
Spain
Italy
ROE

Asia Pacific
China
India
Japan
Australia
South Korea
RoAPAC
Latin America
Brazil
Mexico
Rest of the World

Furthermore, years considered for the study are as follows:

Historical year – 2018, 2019
Base year – 2020
Forecast period – 2021 to 2027.

Target Audience of the Global Extruders Market in Market Study:

Key Consulting Companies & Advisors
Large, medium-sized, and small enterprises
Venture capitalists
Value-Added Resellers (VARs)
Third-party knowledge providers
Investment bankers
Investors

ページTOPに戻る

Table of Contents

Chapter 1. Executive Summary
1.1. Market Snapshot
1.2. Global & Segmental Market Estimates & Forecasts, 2019-2027 (USD Billion)
1.2.1. Extruders Market, by Region, 2019-2027 (USD Billion)
1.2.2. Extruders Market, by Extruder Type, 2019-2027 (USD Billion)
1.2.3. Extruders Market, by End-Use Industry, 2019-2027 (USD Billion)
1.3. Key Trends
1.4. Estimation Methodology
1.5. Research Assumption
Chapter 2. Global Extruders Market Definition and Scope
2.1. Objective of the Study
2.2. Market Definition & Scope
2.2.1. Scope of the Study
2.2.2. Industry Evolution
2.3. Years Considered for the Study
2.4. Currency Conversion Rates
Chapter 3. Global Extruders Market Dynamics
3.1. Extruders Market Impact Analysis (2019-2027)
3.1.1. Market Drivers
3.1.1.1. High investment in building & construction industry
3.1.1.2. Growing demand for plastic and metal products
3.1.2. Market Restraint
3.1.2.1. High initial and maintenance cost of machines
3.1.3. Market Opportunities
3.1.3.1. Rise in automation
Chapter 4. Global Extruders Market Industry Analysis
4.1. Porter’s 5 Force Model
4.1.1. Bargaining Power of Suppliers
4.1.2. Bargaining Power of Buyers
4.1.3. Threat of New Entrants
4.1.4. Threat of Substitutes
4.1.5. Competitive Rivalry
4.1.6. Futuristic Approach to Porter’s 5 Force Model (2018-2027)
4.2. PEST Analysis
4.2.1. Political
4.2.2. Economical
4.2.3. Social
4.2.4. Technological
4.3. Investment Adoption Model
4.4. Analyst Recommendation & Conclusion
Chapter 5. Global Extruders Market, by Extruder Type
a. Market Snapshot
5.1. Global Extruders Market by Extruder Type, Performance - Potential Analysis
5.2. Global Extruders Market Estimates & Forecasts by Extruder Type 2018-2027 (USD Billion)
5.3. Extruders Market, Sub Segment Analysis
5.3.1. Single-Screw Extruder
5.3.2. Twin-Screw Extruder
5.3.3. Ram Extruder
Chapter 6. Global Extruders Market, by End-Use Industry
b. Market Snapshot
6.1. Global Extruders Market by End-Use Industry, Performance - Potential Analysis
6.2. Global Extruders Market Estimates & Forecasts by End-Use Industry 2018-2027 (USD Billion)
6.3. Extruders Market, Sub Segment Analysis
6.3.1. Building & Construction
6.3.2. Transportation
6.3.3. Consumer Goods
6.3.4. Others
Chapter 7. Global Extruders Market, Regional Analysis
7.1. Extruders Market, Regional Market Snapshot
7.2. North America Extruders Market
7.2.1. U.S. Extruders Market
7.2.1.1. Extruder Type breakdown estimates & forecasts, 2018-2027
7.2.1.2. End-Use Industry breakdown estimates & forecasts, 2018-2027
7.2.2. Canada Extruders Market
7.3. Europe Extruders Market Snapshot
7.3.1. U.K. Extruders Market
7.3.2. Germany Extruders Market
7.3.3. France Extruders Market
7.3.4. Spain Extruders Market
7.3.5. Italy Extruders Market
7.3.6. Rest of Europe Extruders Market
7.4. Asia-Pacific Extruders Market Snapshot
7.4.1. China Extruders Market
7.4.2. India Extruders Market
7.4.3. Japan Extruders Market
7.4.4. Australia Extruders Market
7.4.5. South Korea Extruders Market
7.4.6. Rest of Asia Pacific Extruders Market
7.5. Latin America Extruders Market Snapshot
7.5.1. Brazil Extruders Market
7.5.2. Mexico Extruders Market
7.6. Rest of The World Extruders Market
Chapter 8. Competitive Intelligence
8.1. Top Market Strategies
8.2. Company Profiles
8.2.1. Hillenbrand, Inc.
8.2.1.1. Key Information
8.2.1.2. Overview
8.2.1.3. Financial (Subject to Data Availability)
8.2.1.4. Product Summary
8.2.1.5. Recent Developments
8.2.2. Shibaura Machine Co. Ltd. (Toshiba Machine Co. Ltd)
8.2.3. The Japan Steel Works Ltd.
8.2.4. Kraussmaffei Group Gmbh
8.2.5. Battenfeld-Cincinnati
8.2.6. NFM
8.2.7. Clextral
8.2.8. Leistritz AG
8.2.9. Davis-Standard LLC
8.2.10. Boco Pardubice Machines S.R.O.
Chapter 9. Research Process
9.1. Research Process
9.1.1. Data Mining
9.1.2. Analysis
9.1.3. Market Estimation
9.1.4. Validation
9.1.5. Publishing
9.2. Research Attributes
9.3. Research Assumption