Summary

The Reciprocating Compressor Market size was valued at $4,872.63 million in 2022 and is estimated to reach $7,208.10 million by 2032, exhibiting a CAGR of 4.2% from 2023 to 2032. Reciprocating compressor, also known as a piston compressor, is a positive displacement device. It is one of the most widely used types of compressors in which gas is compressed by reciprocating motion of a piston. It handles a low mass of gas but high-pressure ratio. During the operation of reciprocating compression, it takes a large amount of gas from the suction line. It is then compressed by the reciprocation motion of the piston driven by the crankshaft, and then it discharges the compressed gas to the discharge line.

There are two types of reciprocating compressors for general purpose, such as single acting reciprocating compressor and double-acting reciprocating compressor. In single-acting type, the compressor cylinder is usually arranged in the vertical position while in double acting the compression cylinders are normally arranged in horizontal. Reciprocating compressor is used to produce high-pressure gas output. Reciprocating compressor is mainly used in the refrigeration cycle. It is widely used in oil refineries, gas pipelines, natural gas processing plants, chemical plants, etc.

The rise in demand for reciprocating compressors from various industry verticals such as oil and gas, power generation, chemical plants, and others is expected to boost the market growth. In addition, it offers various advantages such as flexibility of use, higher pressure generation, high efficiencies achieved, and the efficiency of use in intermittent cycling which is creating the demand for reciprocating compressor. In addition, the increase in need for energy efficient products, increasing application areas, penetration of IoT & Industry 4.0, and the increased market for compressed air supplements the market growth. Reciprocating compressor gains traction among the end users due to high rate of adoption from end-user industries, rise in number of industrial infrastructure projects, and increase in investment across all the process industries which is expected to boost the market growth.

The reciprocating compressor market is segmented on the basis of type, stage, end user, and region. By type, the market is categorized into single acting, double acting, and diaphragm. On the basis of stage, it is bifurcated into single stage and multi-stage. As per end user, the market is categorized into oil and gas, pharmaceutical, chemical plants, refrigeration plants, food, manufacturing, automotive, and others. Region wise, the market is analyzed across the North America, Europe, Asia-Pacific and LAMEA.
The major players that operate in the global market have adopted key strategies such as product launch and product development to strengthen their market outreach and sustain the stiff competition in the market.

Competition Analysis
Key companies profiled in the reciprocating compressor market report include Ariel Corporation, Atlas Copco AB, Burckhardt Compression Holding AG, Gardner Denver Holdings, Inc., General Electric, Howden Group Holdings Limited, IHI Corporation, Mayekawa Mfg. Co., Ltd., SIEMENS AG, and Ingersoll Rand.

Key benefits for stakeholders
The report provides an extensive analysis of the current and emerging global reciprocating compressor market trends.
In-depth global reciprocating compressor market analysis is conducted by constructing market estimations for key market segments between 2022 and 2032.
Extensive analysis of the global reciprocating compressor market is conducted by following key product positioning and monitoring of top competitors within the market framework.
A comprehensive analysis of all the regions is provided to determine the prevailing opportunities.
The global reciprocating compressor market revenue and volume forecast analysis from 2023 to 2032 is included in the report.
The key players within the global reciprocating compressor market are profiled in this report and their strategies are analyzed thoroughly, which helps understand the competitive outlook of the global reciprocating compressor industry.

Additional benefits you will get with this purchase are:
● Quarterly Update and* (only available with a corporate license, on listed price)
● 5 additional Company Profile of client Choice pre- or Post-purchase, as a free update.
● Free Upcoming Version on the Purchase of Five and Enterprise User License.
● 16 analyst hours of support* (post-purchase, if you find additional data requirements upon review of the report, you may receive support amounting to 16 analyst hours to solve questions, and post-sale queries)
● 15% Free Customization* (in case the scope or segment of the report does not match your requirements, 15% is equivalent to 3 working days of free work, applicable once)
● Free data Pack on the Five and Enterprise User License. (Excel version of the report)
● Free Updated report if the report is 6-12 months old or older.
● 24-hour priority response*
● Free Industry updates and white papers.

Possible Customization with this report (with additional cost and timeline, please talk to the sales executive to know more)
● Investment Opportunities
● Go To Market Strategy
● Market share analysis of players by products/segments
● New Product Development/ Product Matrix of Key Players
● Additional company profiles with specific to client's interest
● Additional country or region analysis- market size and forecast
● Average Selling Price Analysis / Price Point Analysis
● Brands Share Analysis
● Criss-cross segment analysis- market size and forecast
● Expanded list for Company Profiles
● Historic market data
● Import Export Analysis/Data
● Key player details (including location, contact details, supplier/vendor network etc. in excel format)
● Market share analysis of players at global/region/country level
● Reimbursement Scenario
● SWOT Analysis
● Volume Market Size and Forecast
Key Market Segments
By Type
● Single Acting
● Double Acting
● Diaphragm
By Stage Type
● Single Stage
● Multi Stage
By End User
● Oil and Gas
● Pharmaceutical
● Chemical plants
● Refrigeration plants
● Food
● Manufacturing
● Automotive
● Others
By Region
● North America
○ U.S.
○ Canada
○ Mexico
● Europe
○ Germany
○ France
○ UK
○ Italy
○ Rest of Europe
● Asia-Pacific
○ China
○ Japan
○ South Korea
○ India
○ Rest of Asia-Pacific
● LAMEA
○ LAMEA
○ Middle East
○ Africa
● Key Market Players
○ Atlas Copco AB
○ IHI Corporation
○ General Electric
○ Howden Group Holdings Limited
○ SIEMENS AG
○ Ingersoll Rand
○ Ariel Corporation.
○ Burckhardt Compression Holding AG
○ Gardner Denver Holdings, Inc.
○ Mayekawa Mfg. Co., Ltd.

ページTOPに戻る

Table of Contents

CHAPTER 1: INTRODUCTION
1.1. Report description
1.2. Key market segments
1.3. Key benefits to the stakeholders
1.4. Research methodology
1.4.1. Primary research
1.4.2. Secondary research
1.4.3. Analyst tools and models
CHAPTER 2: EXECUTIVE SUMMARY
2.1. CXO Perspective
CHAPTER 3: MARKET OVERVIEW
3.1. Market definition and scope
3.2. Key findings
3.2.1. Top impacting factors
3.2.2. Top investment pockets
3.3. Porter’s five forces analysis
3.3.1. Low bargaining power of suppliers
3.3.2. Low threat of new entrants
3.3.3. Low threat of substitutes
3.3.4. Low intensity of rivalry
3.3.5. Low bargaining power of buyers
3.4. Market dynamics
3.4.1. Drivers
3.4.1.1. Rapid industrialization in developing countries
3.4.1.2. Growth in the oil & gas sector
3.4.2. Restraints
3.4.2.1. High Investment and Maintenance Cost
3.4.3. Opportunities
3.4.3.1. Technological advancements
CHAPTER 4: RECIPROCATING COMPRESSOR MARKET, BY TYPE
4.1. Overview
4.1.1. Market size and forecast
4.2. Single Acting
4.2.1. Key market trends, growth factors and opportunities
4.2.2. Market size and forecast, by region
4.2.3. Market share analysis by country
4.3. Double Acting
4.3.1. Key market trends, growth factors and opportunities
4.3.2. Market size and forecast, by region
4.3.3. Market share analysis by country
4.4. Diaphragm
4.4.1. Key market trends, growth factors and opportunities
4.4.2. Market size and forecast, by region
4.4.3. Market share analysis by country
CHAPTER 5: RECIPROCATING COMPRESSOR MARKET, BY STAGE TYPE
5.1. Overview
5.1.1. Market size and forecast
5.2. Single Stage
5.2.1. Key market trends, growth factors and opportunities
5.2.2. Market size and forecast, by region
5.2.3. Market share analysis by country
5.3. Multi Stage
5.3.1. Key market trends, growth factors and opportunities
5.3.2. Market size and forecast, by region
5.3.3. Market share analysis by country
CHAPTER 6: RECIPROCATING COMPRESSOR MARKET, BY END USER
6.1. Overview
6.1.1. Market size and forecast
6.2. Oil and Gas
6.2.1. Key market trends, growth factors and opportunities
6.2.2. Market size and forecast, by region
6.2.3. Market share analysis by country
6.3. Pharmaceutical
6.3.1. Key market trends, growth factors and opportunities
6.3.2. Market size and forecast, by region
6.3.3. Market share analysis by country
6.4. Chemical plants
6.4.1. Key market trends, growth factors and opportunities
6.4.2. Market size and forecast, by region
6.4.3. Market share analysis by country
6.5. Refrigeration plants
6.5.1. Key market trends, growth factors and opportunities
6.5.2. Market size and forecast, by region
6.5.3. Market share analysis by country
6.6. Food
6.6.1. Key market trends, growth factors and opportunities
6.6.2. Market size and forecast, by region
6.6.3. Market share analysis by country
6.7. Manufacturing
6.7.1. Key market trends, growth factors and opportunities
6.7.2. Market size and forecast, by region
6.7.3. Market share analysis by country
6.8. Automotive
6.8.1. Key market trends, growth factors and opportunities
6.8.2. Market size and forecast, by region
6.8.3. Market share analysis by country
6.9. Others
6.9.1. Key market trends, growth factors and opportunities
6.9.2. Market size and forecast, by region
6.9.3. Market share analysis by country
CHAPTER 7: RECIPROCATING COMPRESSOR MARKET, BY REGION
7.1. Overview
7.1.1. Market size and forecast By Region
7.2. North America
7.2.1. Key market trends, growth factors and opportunities
7.2.2. Market size and forecast, by Type
7.2.3. Market size and forecast, by Stage Type
7.2.4. Market size and forecast, by End User
7.2.5. Market size and forecast, by country
7.2.5.1. U.S.
7.2.5.1.1. Market size and forecast, by Type
7.2.5.1.2. Market size and forecast, by Stage Type
7.2.5.1.3. Market size and forecast, by End User
7.2.5.2. Canada
7.2.5.2.1. Market size and forecast, by Type
7.2.5.2.2. Market size and forecast, by Stage Type
7.2.5.2.3. Market size and forecast, by End User
7.2.5.3. Mexico
7.2.5.3.1. Market size and forecast, by Type
7.2.5.3.2. Market size and forecast, by Stage Type
7.2.5.3.3. Market size and forecast, by End User
7.3. Europe
7.3.1. Key market trends, growth factors and opportunities
7.3.2. Market size and forecast, by Type
7.3.3. Market size and forecast, by Stage Type
7.3.4. Market size and forecast, by End User
7.3.5. Market size and forecast, by country
7.3.5.1. Germany
7.3.5.1.1. Market size and forecast, by Type
7.3.5.1.2. Market size and forecast, by Stage Type
7.3.5.1.3. Market size and forecast, by End User
7.3.5.2. France
7.3.5.2.1. Market size and forecast, by Type
7.3.5.2.2. Market size and forecast, by Stage Type
7.3.5.2.3. Market size and forecast, by End User
7.3.5.3. UK
7.3.5.3.1. Market size and forecast, by Type
7.3.5.3.2. Market size and forecast, by Stage Type
7.3.5.3.3. Market size and forecast, by End User
7.3.5.4. Italy
7.3.5.4.1. Market size and forecast, by Type
7.3.5.4.2. Market size and forecast, by Stage Type
7.3.5.4.3. Market size and forecast, by End User
7.3.5.5. Rest of Europe
7.3.5.5.1. Market size and forecast, by Type
7.3.5.5.2. Market size and forecast, by Stage Type
7.3.5.5.3. Market size and forecast, by End User
7.4. Asia-Pacific
7.4.1. Key market trends, growth factors and opportunities
7.4.2. Market size and forecast, by Type
7.4.3. Market size and forecast, by Stage Type
7.4.4. Market size and forecast, by End User
7.4.5. Market size and forecast, by country
7.4.5.1. China
7.4.5.1.1. Market size and forecast, by Type
7.4.5.1.2. Market size and forecast, by Stage Type
7.4.5.1.3. Market size and forecast, by End User
7.4.5.2. Japan
7.4.5.2.1. Market size and forecast, by Type
7.4.5.2.2. Market size and forecast, by Stage Type
7.4.5.2.3. Market size and forecast, by End User
7.4.5.3. South Korea
7.4.5.3.1. Market size and forecast, by Type
7.4.5.3.2. Market size and forecast, by Stage Type
7.4.5.3.3. Market size and forecast, by End User
7.4.5.4. India
7.4.5.4.1. Market size and forecast, by Type
7.4.5.4.2. Market size and forecast, by Stage Type
7.4.5.4.3. Market size and forecast, by End User
7.4.5.5. Rest of Asia-Pacific
7.4.5.5.1. Market size and forecast, by Type
7.4.5.5.2. Market size and forecast, by Stage Type
7.4.5.5.3. Market size and forecast, by End User
7.5. LAMEA
7.5.1. Key market trends, growth factors and opportunities
7.5.2. Market size and forecast, by Type
7.5.3. Market size and forecast, by Stage Type
7.5.4. Market size and forecast, by End User
7.5.5. Market size and forecast, by country
7.5.5.1. LAMEA
7.5.5.1.1. Market size and forecast, by Type
7.5.5.1.2. Market size and forecast, by Stage Type
7.5.5.1.3. Market size and forecast, by End User
7.5.5.2. Middle East
7.5.5.2.1. Market size and forecast, by Type
7.5.5.2.2. Market size and forecast, by Stage Type
7.5.5.2.3. Market size and forecast, by End User
7.5.5.3. Africa
7.5.5.3.1. Market size and forecast, by Type
7.5.5.3.2. Market size and forecast, by Stage Type
7.5.5.3.3. Market size and forecast, by End User
CHAPTER 8: COMPETITIVE LANDSCAPE
8.1. Introduction
8.2. Top winning strategies
8.3. Product mapping of top 10 player
8.4. Competitive dashboard
8.5. Competitive heatmap
8.6. Top player positioning, 2022
CHAPTER 9: COMPANY PROFILES
9.1. Ariel Corporation.
9.1.1. Company overview
9.1.2. Key executives
9.1.3. Company snapshot
9.1.4. Operating business segments
9.1.5. Product portfolio
9.1.6. Key strategic moves and developments
9.2. Atlas Copco AB
9.2.1. Company overview
9.2.2. Key executives
9.2.3. Company snapshot
9.2.4. Operating business segments
9.2.5. Product portfolio
9.2.6. Business performance
9.2.7. Key strategic moves and developments
9.3. Burckhardt Compression Holding AG
9.3.1. Company overview
9.3.2. Key executives
9.3.3. Company snapshot
9.3.4. Operating business segments
9.3.5. Product portfolio
9.3.6. Business performance
9.4. Gardner Denver Holdings, Inc.
9.4.1. Company overview
9.4.2. Key executives
9.4.3. Company snapshot
9.4.4. Operating business segments
9.4.5. Product portfolio
9.4.6. Key strategic moves and developments
9.5. General Electric
9.5.1. Company overview
9.5.2. Key executives
9.5.3. Company snapshot
9.5.4. Operating business segments
9.5.5. Product portfolio
9.5.6. Business performance
9.6. Howden Group Holdings Limited
9.6.1. Company overview
9.6.2. Key executives
9.6.3. Company snapshot
9.6.4. Operating business segments
9.6.5. Product portfolio
9.6.6. Business performance
9.7. IHI Corporation
9.7.1. Company overview
9.7.2. Key executives
9.7.3. Company snapshot
9.7.4. Operating business segments
9.7.5. Product portfolio
9.7.6. Business performance
9.8. Mayekawa Mfg. Co., Ltd.
9.8.1. Company overview
9.8.2. Key executives
9.8.3. Company snapshot
9.8.4. Operating business segments
9.8.5. Product portfolio
9.9. SIEMENS AG
9.9.1. Company overview
9.9.2. Key executives
9.9.3. Company snapshot
9.9.4. Operating business segments
9.9.5. Product portfolio
9.9.6. Business performance
9.10. Ingersoll Rand
9.10.1. Company overview
9.10.2. Key executives
9.10.3. Company snapshot
9.10.4. Operating business segments
9.10.5. Product portfolio
9.10.6. Business performance
9.10.7. Key strategic moves and developments