Summary

The Asia Pacific immersion cooling for EV batteries market was valued at US$ 1.56 million in 2026 and is expected to reach US$ 22.89 million by 2030; it is estimated to grow at a CAGR of 95.6% from 2026 to 2030.

Growing Demand for Electric Vehicles Drive Asia Pacific Immersion Cooling for EV Batteries Market

Electric vehicle (EV) sales are proliferating due to concerns regarding environmental protection and government policies favoring the adoption of low-emission or zero-emission vehicles. Also, governments of different countries are offering subsidies and tax rebates to citizens to increase the adoption of EVs. The government authorities are taking various initiatives to promote EVs globally. According to IEA's annual Global Electric Vehicle Outlook, in 2022, more than 10 million electric cars were sold worldwide, which is expected to grow by 35% in 2023 to reach 14 million units. This shows that the electric cars' share of the overall car market has risen to 14% in 2022 from ~4% in 2020 and is projected to reach 18% in 2023. Overall, in 2022, 60% of global electric car sales occurred in China. Per the World Economic Forum, sales of new EVs increased by 82% in 2022 in China, from 3.39 million in 2021 to 6.18 million in 2022. Also, China is the world's largest EV producer, producing 64% of global EV volume. Thus, the growing sales of EVs are boosting the need for batteries that remain cool to function at peak performance throughout the vehicle's life. This factor is driving the growth of the Asia Pacific immersion cooling for EV batteries market.

Asia Pacific Immersion Cooling for EV Batteries Market Overview

The Asia Pacific immersion cooling for EV batteries market in APAC is segmented into China, India, Japan, Australia, South Korea, and the Rest of APAC. One of the key factors driving the Asia Pacific immersion cooling for EV batteries market is the rising adoption of EVs in the region. Increasing concerns regarding pollution and growing preference for environment-friendly modes of transport fuel the demand for EVs in APAC. Further, to raise the adoption of EVs, the governments of different countries are developing several policies. The Association of Southeast Asian Nations (ASEAN) developed a favorable policy to encourage EV adoption. According to the International Renewable Energy Agency (IRENA), approximately 20% of vehicles in Southeast Asia will be EVs by 2025, including 59 million two-wheelers and three-wheelers and 8.9 million cars. In addition, India, South Korea, Taiwan, Vietnam, and other APAC countries are constantly working on attracting several businesses that want to relocate their car manufacturing facilities to the above countries because of low labor costs. For this, the above countries are offering tax rebates, funds, and subsidies, attracting more manufacturing companies to set up their plants. In 2021, the government of India allocated US$ 450 million for the electrification of public and shared transportation, adopting 7,090 e-buses. Also, in April 2021, the Indonesian government announced its plan for EVs to make 20% of all domestic cars manufactured, equal to 400,000 e-cars, by 2025. In addition, in March 2023, Chinese EV manufacturer BYD announced that it had started the construction of its new EV manufacturing facility in Thailand, which will be producing 150,000 passenger cars per year from 2024. Thus, the increase in initiatives and supportive regulations by governments for the production of EVs is expected to surge the sale of EVs in the region, which will also raise the demand for immersion cooling batteries as they can help increase the driving range of EVs and keep the batteries safe from thermal runaway, propelling the Asia Pacific immersion cooling for EV batteries market growth.

Asia Pacific Immersion Cooling for EV Batteries Market Revenue and Forecast to 2030 (US$ Million)

Asia Pacific Immersion Cooling for EV Batteries Market Segmentation

The Asia Pacific immersion cooling for EV batteries market is segmented based on type,

cooling fluid type, and country.

Based on type, the Asia Pacific immersion cooling for EV batteries market is bifurcated into single-phase immersion cooling and two-phase immersion cooling. The single-phase immersion cooling segment held a larger share in 2026.

By cooling fluid type, the Asia Pacific immersion cooling for EV batteries market is segmented into mineral oil, synthetic oil, and others. The synthetic oil segment held the largest share in 2026.

Based on country, the Asia Pacific immersion cooling for EV batteries market is segmented into China, India, Japan, South Korea, and the Rest of Asia Pacific. China dominated the Asia Pacific immersion cooling for EV batteries market in 2026.

Cargill Inc, Engineered Fluids Inc, M&I Materials Ltd, Mahle GmbH, Ricardo Plc, SAE International, The Lubrizol Corp, and XING Mobility Inc are some of the leading companies operating in the Asia Pacific immersion cooling for EV batteries market.

ページTOPに戻る

Table of Contents

TABLE OF CONTENTS

1. Introduction
1.1 The Insight Partners Research Report Guidance
1.2 Market Segmentation
2. Executive Summary
2.1 Key Insights
2.2 Market Attractiveness
3. Research Methodology
3.1 Coverage
3.2 Secondary Research
3.3 Primary Research
4. Asia Pacific Immersion Cooling for EV Batteries Market Landscape
4.1 Overview
4.2 Ecosystem Analysis
4.2.1 List of Vendors in Value Chain:
5. Asia Pacific Immersion Cooling for EV Batteries Market - Key Industry Dynamics
5.1 Market Drivers
5.1.1 Increase in Demand for High-Capacity Batteries to Extend EV Driving Range
5.1.2 Growing Demand for Electric Vehicles
5.2 Market Restraints
5.2.1 Challenges Associated with Immersion Cooling
5.3 Market Opportunities
5.3.1 Advantages of Immersion Cooling
5.4 Future Trends
5.4.1 Growing Incorporation of Immersion-cooled Battery into Road-Going Vehicles
5.5 Impact Analysis of Drivers and Restraints
6. Immersion Cooling for EV Batteries Market - Asia Pacific Market Analysis
6.1 Asia Pacific Immersion Cooling for EV Batteries Market Overview
6.2 Asia Pacific Immersion Cooling for EV Batteries Market Revenue (US$ Million), 2022 - 2030
6.3 Asia Pacific Immersion Cooling for EV Batteries Market Forecast and Analysis
7. Asia Pacific Immersion Cooling for EV Batteries Market Analysis - Type
7.1 Single-Phase Immersion Cooling
7.1.1 Overview
7.1.2 Single-Phase Immersion Cooling Market Revenue and Forecasts to 2030 (US$ Million)
7.2 Two-Phase Immersion Cooling
7.2.1 Overview
7.2.2 Two-Phase Immersion Cooling Market Revenue and Forecasts to 2030 (US$ Million)
8. Asia Pacific Immersion Cooling for EV Batteries Market Analysis - Cooling Fluid Type
8.1 Mineral Oil
8.1.1 Overview
8.1.2 Mineral Oil Market Revenue and Forecasts to 2030 (US$ Million)
8.2 Synthetic Oil
8.2.1 Overview
8.2.2 Synthetic Oil Market Revenue and Forecasts to 2030 (US$ Million)
8.3 Others
8.3.1 Overview
8.3.2 Others Market Revenue and Forecasts to 2030 (US$ Million)
9. Asia Pacific Immersion Cooling for EV Batteries Market - Country Analysis
9.1 Overview
9.1.1 Asia Pacific Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Countries
9.1.1.1 China: Asia Pacific Immersion Cooling for EV Batteries Market Revenue and Forecasts to 2030 (US$ Mn)
9.1.1.1.1 China: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Type
9.1.1.1.2 China: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Cooling Fluid Type
9.1.1.2 India: Asia Pacific Immersion Cooling for EV Batteries Market Revenue and Forecasts to 2030 (US$ Mn)
9.1.1.2.1 India: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Type
9.1.1.2.2 India: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Cooling Fluid Type
9.1.1.3 Japan: Asia Pacific Immersion Cooling for EV Batteries Market Revenue and Forecasts to 2030 (US$ Mn)
9.1.1.3.1 Japan: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Type
9.1.1.3.2 Japan: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Cooling Fluid Type
9.1.1.4 South Korea: Asia Pacific Immersion Cooling for EV Batteries Market Revenue and Forecasts to 2030 (US$ Mn)
9.1.1.4.1 South Korea: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Type
9.1.1.4.2 South Korea: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Cooling Fluid Type
9.1.1.5 Rest of Asia Pacific: Asia Pacific Immersion Cooling for EV Batteries Market Revenue and Forecasts to 2030 (US$ Mn)
9.1.1.5.1 Rest of Asia Pacific: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Type
9.1.1.5.2 Rest of Asia Pacific: Asia Pacific Immersion Cooling for EV Batteries Market Breakdown by Cooling Fluid Type
10. Competitive Landscape
10.1 Heat Map Analysis By Key Players
10.2 Company Positioning & Concentration
11. Industry Landscape
11.1 Market Initiative
11.2 New Development
12. Company Profiles
12.1 Ricardo Plc
12.1.1 Key Facts
12.1.2 Business Description
12.1.3 Contribution to Immersion Cooling Technology for EV Batteries
12.1.4 Financial Overview
12.1.5 SWOT Analysis
12.1.6 Key Developments
12.2 Mahle GmbH
12.2.1 Key Facts
12.2.2 Business Description
12.2.3 Contribution to Immersion Cooling Technology for EV Batteries
12.2.4 Financial Overview
12.2.5 SWOT Analysis
12.2.6 Key Developments
12.3 XING Mobility Inc
12.3.1 Key Facts
12.3.2 Business Description
12.3.3 Contribution to Immersion Cooling Technology for EV Batteries
12.3.4 Financial Overview
12.3.5 SWOT Analysis
12.3.6 Key Developments
12.4 The Lubrizol Corp
12.4.1 Key Facts
12.4.2 Business Description
12.4.3 Contribution to Immersion Cooling Technology for EV Batteries
12.4.4 Financial Overview
12.4.5 SWOT Analysis
12.4.6 Key Developments
12.5 SAE International
12.5.1 Key Facts
12.5.2 Business Description
12.5.3 Contribution to Immersion Cooling Technology for EV Batteries
12.5.4 Financial Overview
12.5.5 SWOT Analysis
12.5.6 Key Developments
12.6 Cargill Inc
12.6.1 Key Facts
12.6.2 Business Description
12.6.3 Contribution to Immersion Cooling Technology for EV Batteries
12.6.4 Financial Overview
12.6.5 SWOT Analysis
12.6.6 Key Developments
12.7 Engineered Fluids Inc
12.7.1 Key Facts
12.7.2 Business Description
12.7.3 Contribution to Immersion Cooling Technology for EV Batteries
12.7.4 Financial Overview
12.7.5 SWOT Analysis
12.7.6 Key Developments
12.8 M&I Materials Ltd
12.8.1 Key Facts
12.8.2 Business Description
12.8.3 Contribution to Immersion Cooling Technology for EV Batteries
12.8.4 Financial Overview
12.8.5 SWOT Analysis
12.8.6 Key Developments
13. Appendix
13.1 Word Index