Summary

Asia Pacific Automotive PCB Market is valued at approximately USD 3.48 billion in 2023 and is anticipated to grow with a healthy growth rate of more than 7.60% over the forecast period 2024-2032. Automotive PCBs are circuit boards specifically engineered for use in automotive electronic systems. These printed circuit boards are designed to endure the harsh conditions within a vehicle, such as temperature fluctuations, vibrations, and potential exposure to moisture and chemicals. Furthermore, rising vehicle electrification is gaining attention towards the Asia Pacific Automotive PCB Market. Governments across the Asia Pacific region is implementing stringent regulations and incentives to promote vehicle electrification as part of efforts to reduce greenhouse gas emissions, combat air pollution, and enhance energy security. This includes subsidies, tax incentives, and mandates for electric vehicle adoption, which stimulate demand for Automotive PCBs optimized for electric and hybrid vehicles.

The Asia Pacific Automotive PCB Market is driven by a growing rate of urbanization and growing consumer demand for safety and connectivity features across the region. Urbanization often exacerbates environmental issues such as air pollution, greenhouse gas emissions, and noise pollution. To address these concerns, governments in the Asia Pacific region are implementing stringent regulations and incentives to promote the adoption of Electric Vehicles (EVs) and Hybrid Electric Vehicles (HEVs), which have lower emissions compared to traditional internal combustion engine vehicles. In addition, Advanced safety technologies, such as Advanced Driver Assistance Systems (ADAS), collision avoidance systems, lane departure warnings, and automatic emergency braking, rely heavily on electronic components and sensors, which are integrated into vehicles using Automotive PCBs. As consumers prioritize safety features, there is a corresponding increase in the demand for Automotive PCBs capable of supporting these functionalities. However, high expense related to Automotive PCB and absence of standardization within automotive industry is going to impede the overall demand for the market during the forecast period 2024-2032.

The key Countries considered for the Asia Pacific Automotive PCB market study includes China, India, Japan, South Korea, Australia, and Rest of Asia Pacific. In 2023, China was the largest regional market in terms of revenue owing to factors such as increasing automotive production across the region. The Chinese government provides substantial support and incentives to the automotive industry to stimulate production, innovation, and technology development. This includes subsidies, tax incentives, research grants, and infrastructure investments aimed at promoting the development and adoption of electric vehicles, Advanced Driver Assistance Systems (ADAS), and connected vehicles. Government support for automotive electrification and technological advancements drives the demand for Automotive PCBs, as vehicles incorporate more sophisticated electronic systems and features. Furthermore, the market in India, on the other hand, is expected to grow at the fastest rate over the forecast period.

Major market player included in this report are:
Chin Poon Industrial Co., Ltd
Meiko Electronics Co., Ltd
Nippon Mektron, Ltd
Tripod Technology Corporation
Unimicron Technology Corporation
Kingboard Chemical Holdings Ltd.
Company 7
Company 8
Company 9
Company 10

The detailed segments and sub-segment of the market are explained below:

By Vehicle Type
Passenger Car
Commercial Vehicle

By Type
Single or Double layer
Multi-layer
HDI
FPC
Others

By Application
ADAS
Body & comfort
Infotainment
Others

By Region:
Asia Pacific
China
India
Japan
Australia
South Korea
RoAPAC

Years considered for the study are as follows:
Historical year – 2022
Base year – 2023
Forecast period – 2024 to 2032

Key Takeaways:
Market Estimates & Forecast for 10 years from 2022 to 2032.
Annualized revenues and country level analysis for each market segment.
Detailed analysis of geographical landscape with Country level analysis of major regions.
Competitive landscape with information on major players in the market.
Analysis of key business strategies and recommendations on future market approach.
Analysis of competitive structure of the market.
Demand side and supply side analysis of the market

ページTOPに戻る

Table of Contents

Chapter 1. Asia Pacific Automotive PCB Market Definition and Research Assumptions
1.1. Research Objective
1.2. Market Definition
1.3. Research Assumptions
1.3.1. Inclusion & Exclusion
1.3.2. Limitations
1.3.3. Supply Side Analysis
1.3.3.1. Availability
1.3.3.2. Infrastructure
1.3.3.3. Regulatory Environment
1.3.3.4. Market Competition
1.3.3.5. Economic Viability (Consumer’s Perspective)
1.3.4. Demand Side Analysis
1.3.4.1. Regulatory frameworks
1.3.4.2. Technological Advancements
1.3.4.3. Environmental Considerations
1.3.4.4. Consumer Awareness & Acceptance
1.4. Estimation Methodology
1.5. Years Considered for the Study
1.6. Currency Conversion Rates

Chapter 2. Executive Summary
2.1. Asia Pacific Automotive PCB Market Size & Forecast (2022- 2032)
2.2. Regional Summary
2.3. Segmental Summary
2.3.1. By Vehicle Type
2.3.2. By Type
2.3.3. By Application
2.4. Key Trends
2.5. Recession Impact
2.6. Analyst Recommendation & Conclusion
Chapter 3. Asia Pacific Automotive PCB Market Dynamics
3.1. Market Drivers
3.2. Market Challenges
3.3. Market Opportunities
Chapter 4. Asia Pacific Automotive PCB Market Industry Analysis
4.1. Porter’s 5 Force Model
4.1.1. Bargaining Power of Suppliers
4.1.2. Bargaining Power of Buyers
4.1.3. Threat of New Entrants
4.1.4. Threat of Substitutes
4.1.5. Competitive Rivalry
4.1.6. Futuristic Approach to Porter’s 5 Force Model
4.1.7. Porter’s 5 Force Impact Analysis
4.2. PESTEL Analysis
4.2.1. Political
4.2.2. Economical
4.2.3. Social
4.2.4. Technological
4.2.5. Environmental
4.2.6. Legal
4.3. Top investment opportunity
4.4. Top winning strategies
4.5. Disruptive Trends
4.6. Industry Expert Perspective
4.7. Analyst Recommendation & Conclusion
Chapter 5. Asia Pacific Automotive PCB Market Size & Forecasts by Vehicle Type 2022-2032
5.1. Passenger Car
5.2. Commercial Vehicle
Chapter 6. Asia Pacific Automotive PCB Market Size & Forecasts by Type 2022-2032
6.1. Single or Double layer
6.2. Multi-layer
6.3. HDI
6.4. FPC
6.5. Others
Chapter 7. Asia Pacific Automotive PCB Market Size & Forecasts by Application 2022-2032
7.1. ADAS
7.2. Body & comfort
7.3. Infotainment
7.4. Others
Chapter 8. Asia Pacific Automotive PCB Market Size & Forecasts by Country 2022-2032
8.1. China Automotive PCB Market
8.1.1. Vehicle Type breakdown size & forecasts, 2022-2032
8.1.2. Type breakdown size & forecasts, 2022-2032
8.1.3. Application breakdown size & forecasts, 2022-2032
8.2. India Automotive PCB Market
8.3. Japan Automotive PCB Market
8.4. Australia Automotive PCB Market
8.5. South Korea Automotive PCB Market
8.6. Rest of Asia Pacific Automotive PCB Market
Chapter 9. Competitive Intelligence
9.1. Key Company SWOT Analysis
9.1.1. Company 1
9.1.2. Company 2
9.1.3. Company 3
9.2. Top Market Strategies
9.3. Company Profiles
9.3.1. Chin Poon Industrial Co., Ltd
9.3.1.1. Key Information
9.3.1.2. Overview
9.3.1.3. Financial (Subject to Data Availability)
9.3.1.4. Product Summary
9.3.1.5. Market Strategies
9.3.2. Meiko Electronics Co., Ltd
9.3.3. Nippon Mektron, Ltd
9.3.4. Tripod Technology Corporation
9.3.5. Unimicron Technology Corporation
9.3.6. Kingboard Chemical Holdings Ltd
9.3.7. Company 7
9.3.8. Company 8
9.3.9. Company 9
9.3.10. Company 10
Chapter 10. Research Process
10.1. Research Process
10.1.1. Data Mining
10.1.2. Analysis
10.1.3. Market Estimation
10.1.4. Validation
10.1.5. Publishing
10.2. Research Attributes