Summary

Executive Summary

The Global Process Control Market was valued at USD 7520.11 Million in the year 2020. The increasing proliferation of loT (Internet of Things) and the rising need for wafer fab equipment memory devices like 3D NAND and DRAM are driving the growth of the market. The main challenge posed to the industry is the introduction of multi-layer wiring and planarization process in the manufacturing of wafer fab equipment devices which existing inspection systems are incapable to detect. The growing demand for IoT devices will offer immense growth opportunities.

Based on process type, the market is segmented into Inspection and Defect Review, Metrology and Other Process Control. The Inspection and Defect Review segment is expected to grow at a higher CAGR during the forecast period as inspection is about finding the locations of potential defects and is the largest process, representing approximately 50% of the Process Control market.

The Asia Pacific is estimated to hold the maximum share in the global Process Control Market. The Asia Pacific continues to dominate the outsourced aspects of wafer fab equipment production. Nearly 80 per cent of wafer fab equipment foundries and assembly and test operations are concentrated in Asia. Factors such as higher concentration of OEMs and ODMs across industries, including consumer electronics, automotive, healthcare, industrial, and others in the Asia Pacific will significantly drive microcontroller manufacturing demand which in turn drives the demand for wafer fab equipment. Further, growing advances in wafer fab equipment manufacturing will facilitate the Process Control market growth in the Asia Pacific over the forecast period.

By 2026, the wafer fab equipment industry will experience significant benefits from the ongoing development and innovation in connectivity, communications, the automotive industry, and data centres. In addition, the increase in the consumption of electronic components used in the navigation of automobiles, safety, and infotainment further contributes to the growth of the wafer fab equipment sector and process control market.

Scope of the Report

• The report presents the analysis of the Process Control Market for the historical period of 2016-2020 and the forecast period of 2021-2026.

• The report analyses the Process Control Market by Value (USD Million).

• The report analyses the Process Control Market by Process Type (Inspection & Defect Review, Metrology, Other Process Control).

• The report analyses the Process Control Market by Application (Wafers, Photomasks Others)

• The Global Process Control Market has been analysed by Countries (United States, Canada, Mexico, Germany, France, United Kingdom, China, Japan, Taiwan, South Korea).

• The key insights of the report have been presented through the frameworks of SWOT and Porter’s Five Forces Analysis. Also, the attractiveness of the market has been presented by region, by Process Type, by Application.

• Also, the major opportunities, trends, drivers and challenges of the industry has been analysed in the report.

• The report tracks competitive developments, strategies, mergers and acquisitions and new product development. The companies analysed in the report include – Applied Materials, KLA Corporations, Lasertec Corporation, ASML Holdings, Hitachi High-Tech Corporation, Nova Measuring Instruments, Samsung Electro-Mechanics, Lam Research Corporation, Analog Devices, Inc., Ichor Systems, Carl Zeiss, Onto Innovations.

Key Target Audience

• Process Control Industry Vendors

• Semiconductor Manufacturers

• Consulting and Advisory Firms

• Government and Policy Makers

• Regulatory Authorities

ページTOPに戻る

Table of Contents

1. Report Scope and Methodology

1.1 Scope of the Report

1.2 Research Methodology

1.3 Executive Summary

2. Strategic Recommendations

3. Global Process Control Market: Process Overview

4. Global Process Control Market: An Analysis

4.1 Market Size, By Value, 2016-2026

4.2 Impact of COVID-19 on Process Control Market

4.3 Global Process Control Market

5. Global Process Control Market Segmentation Analysis

5.1 Global Process Control Market By Process Type

5.2 Competitive Scenario of Global Process Control Market: By Process Type (2020 & 2026)

5.3 By Inspection & Defect Review– Market Size and Forecast (2016-2026)

5.4 By Metrology– Market Size and Forecast (2016-2026)

5.5 By Other Process Control– Market Size and Forecast (2016-2026)

6. Global Process Control Market By Application

6.1 Competitive Scenario of Global Process Control Market: By Application (2020 & 2026)

6.2 By Wafers– Market Size and Forecast (2016-2026)

6.3 By Photomasks– Market Size and Forecast (2016-2026)

6.4 By Others– Market Size and Forecast (2016-2026)

7. Global Process Control Market: Regional Analysis

7.1 Competitive Scenario of Global Process Control Market: By Region (2020 & 2026)

8. Americas Process Control Market: An Analysis (2016-2026)

8.1 Americas Process Control Market by value: Size and Forecast (2016-2026)

8.2 Americas Process Control Market: Prominent Companies

8.3 Market Segmentation By Process Type (Inspection & Defect Review, Metrology, Other Process Control)

8.4 Market Segmentation By Application (Wafers, Photomasks, Others )

8.5 Americas Process Control Market: Country Analysis

8.6 Market Opportunity Chart of Americas Process Control Market - By Country, By Value (Year-2026)

8.7 Competitive Scenario of Americas Process Control Market– By Country (2020 & 2026)

8.8 United States Process Control Market: Size and Forecast (2016-2026)

8.9 United States Process Control Market Segmentation By Process Type (2016-2026)

8.10 United States Process Control Market Segmentation By Application (2016-2026)

8.11 Canada Process Control Market: Size and Forecast (2016-2026)

8.12 Canada Process Control Market Segmentation By Process Type (2016-2026)

8.13 Canada Process Control Market Segmentation By Application (2016-2026)

8.14 Mexico Process Control Market: Size and Forecast (2016-2026)

8.15 Mexico Process Control Market Segmentation By Process Type (2016-2026)

8.16 Mexico Process Control Market Segmentation By Application (2016-2026)

9. Europe Process Control Market: An Analysis (2016-2026)

9.1 Europe Process Control Market by value: Size and Forecast (2016-2026)

9.2 Europe Process Control Market: Prominent Companies

9.3 Market Segmentation By Process Type (Inspection & Defect Review, Metrology, Other Process Control)

9.4 Market Segmentation By Application (Wafers, Photomasks, Others)

9.5 Europe Process Control Market: Country Analysis

9.6 Market Opportunity Chart of  Europe Process Control Market - By Country, By Value (Year-2026)

9.7 Competitive Scenario of Europe Process Control Market– By Country (2020 & 2026)

9.8 Germany Process Control Market: Size and Forecast (2016-2026)

9.9 Germany Process Control Market Segmentation By Process Type (2016-2026)

9.10 Germany Process Control Market Segmentation By Application (2016-2026)

9.11 France Process Control Market: Size and Forecast (2016-2026)

9.12 France Process Control Market Segmentation By Process Type (2016-2026)

9.13 France Process Control Market Segmentation By Application (2016-2026)

9.14 United Kingdom Process Control Market: Size and Forecast (2016-2026)

9.15 United Kingdom Process Control Market Segmentation By Process Type (2016-2026)

9.16 United Kingdom Process Control Market Segmentation By Application (2016-2026)

10. Asia Pacific Process Control Market: An Analysis (2016-2026)

10.1 Asia Pacific Process Control Market by value: Size and Forecast (2016-2026)

10.2 Asia Pacific Process Control Market: Prominent Companies

10.3 Market Segmentation By Process Type (Inspection & Defect Review, Metrology, Other Process Control)

10.4 Market Segmentation By Application (Wafers, Photomasks, Others)

10.5 Asia Pacific Process Control Market: Country Analysis

10.6 Market Opportunity Chart of  Asia Pacific Process Control Market - By Country, By Value (Year-2026)

10.7 Competitive Scenario of Asia Pacific Process Control Market– By Country (2020 & 2026)

10.8 China Process Control Market: Size and Forecast (2016-2026)

10.9 China Process Control Market Segmentation By Process Type (2016-2026)

10.10 China Process Control Market Segmentation By Application (2016-2026)

10.11 Japan Process Control Market: Size and Forecast (2016-2026)

10.12 Japan Process Control Market Segmentation By Process Type (2016-2026)

10.13 Japan Process Control Market Segmentation By Application (2016-2026)

10.14 Taiwan Process Control Market: Size and Forecast (2016-2026)

10.15 Taiwan Process Control Market Segmentation By Process Type (2016-2026)

10.16 Taiwan Process Control Market Segmentation By Application (2016-2026)

10.17 South Korea Process Control Market: Size and Forecast (2016-2026)

10.18 South Korea Process Control Market Segmentation By Process Type (2016-2026)

10.19 South Korea Process Control Market Segmentation By Application (2016-2026)

11. Global Process Control Market Dynamics

11.1 Global Process Control Market Drivers

11.2 Global Process Control Market Restraints

11.3 Global Process Control Market Trends

12. Market Attractiveness

12.1 Market Attractiveness Chart of Global Process Control Market - By Process Type (Year 2026)

12.2 Market Attractiveness Chart of Global Process Control Market - By Application (Year 2026)

12.3 Market Attractiveness Chart of Global Process Control Market - By Region (Year 2026)

13. Competitive Landscape

13.1 Market Share of Leading Global Companies

13.2 SWOT Analysis– Global Process Control Market

13.3 Porter Five Force Analysis– Global Process Control Market

14. Global Process Control Market: Recent Developments, Merger & Acquisition

15. Global Process Control Market Split by Main Players

16. Company Profiles (Business Description, Financial Analysis, Business Strategy)

16.1 Applied Materials

16.2 KLA Corporation

16.3 Lasertec Corporation

16.4 ASML  Holdings

16.5 Hitachi High-Tech Corporation

16.6 Nova Measuring Instruments

16.7 Samsung Electro-Mechanics

16.8 Lam Research Corporation

16.9 Analog Devices, Inc.

16.10 Ichor systems

16.11 Carl Zeiss

16.12 Onto Innovations